Sanyo PLC-XU58, PLC-XU51, PLC-SU51 owner manual Standby mode, Power management, On start, Lamp mode

Page 45

Setting

Standby mode

This function is available when using Multi Card Imager optionally supplied, and it reduces standby energy when selecting Eco.

Eco

···· reduces standby energy.

Normal ···· consumes normal standby energy.

Power management

For reducing power consumption as well as maintaining the lamp life, the Power Management function turns off the projection lamp when the input signal is interrupted and no button is pressed for 30 seconds or more.

If the input signal is interrupted and no button is pressed for 30 seconds or more, the timer display with the message "No signal" appears on the screen. The count-down of the set time will get started. The count-down time can be set between 1 and 30 minutes.

When the count-down time has been elapsed, the lamp will be turned off to cool itself down. The POWER indicator is blinking red during this cooling-off period. The next operation depends on the setting as follows :

Ready . . . . . .When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control unit is pressed.

Shutdown . . .When the lamp has been fully cooled down, the power will be turned off.

Off . . . . . . . . .The Power Management function is canceled.

On start

When this function is “On,” the projector is automatically turned on just by connecting the AC power cord to a wall outlet.

✔Note:

Be sure to turn the projector off properly (see “Turning Off the Projector” on page 19). If the projector is turned off in the incorrect sequence, such as disconnecting the AC power cord before completing the cool down etc., the On start function does not operate properly.

Lamp mode

This function allows you to change brightness of the screen.

···· normal brightness

···· brightness according with the input signal

···· lower brightness reduces the lamp power consumption and extends the lamp life.

Standby mode

Press the SELECT button at this icon to display other items.

Power management

Time left until Lamp off

Press the SELECT button at Power management and this box appears. Choose one of three settings with the Point 7

8button, and go to the timer with the Point ed button and set time with the Point 7 8 button.

Setting

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Model PLC-XU58 PLC-XU56 PLC-XU51 PLC-SU51 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsInstalling the Projector in Proper Position Air CirculationMoving the Projector Federal Communication Commission Notice CompliancePart Names and Functions FrontBack Bottom Part Names and Functions Rear TerminalTop Control @1 !3 Remote ControlPointer Function Laser Pointer FunctionOperating Range Wireless Mouse OperationPart Names FunctionsRemote Control Battery Installation Remote Control CodeButton. The code switches sequentially for one pressing With holding down the Menu button, press the ImageInstallation Adjustable FeetPositioning the Projector 200 240 V AC Connecting the AC Power CordInstallation Connecting to a ComputerExternal Audio Equipment Video cable Video and audio cable Connecting to Video EquipmentCable Stereo Connecting to Component Video EquipmentBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeBasic Operation Turning Off the ProjectorRemote Control How to Operate the On-Screen MenuOn-Screen Menu Top ControlBasic Operation Menu BarAuto Setup Function Zoom and Focus AdjustmentPicture Freeze Function Keystone AdjustmentNo Show Function BasicSound Adjustment Timer FunctionVolume MuteComputer Input Input Source SelectionComputer Input Auto Computer System SelectionMode PC System MenuPC Adjust Menu Auto PC AdjustmentTo store adjustment parameters Auto PC AdjManual PC Adjustment Mode free ResetDisplay area Display area HImage Level Selection Image Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputVideo Input Input button Video Computer Video buttonInput button Computer Video Computer button Input Source Selection Component, RGB Scart 21-PinAuto Video System SelectionAV System Menu Video or S-Video AV System Menu ComponentCinema Image1~4Image button Dynamic Standard Cinema BlackboardGreen Tint ColorFilm ProgressiveProvides image at a normal video aspect ratio of 4 Setting SettingAuto Setup LanguageSetting Capture LogoCeiling RearPower management Standby modeLamp mode On startPointer Remote controlUSB Key lockTo Change the PIN Code Lock setting PIN code lockTo Change the PIN Code Factory default Lamp counter resetFan Factory default FanCleaning Maintenance and CleaningProjector is shut down and the Warning indicator lights red Then check the matters belowAttaching the Lens Cover Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetMaintenance & Cleaning Reset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Remote Control does not workComputer 2 cannot be selected Terminal item cannot be selectedMenu Tree Image Select System SettingProjector Condition Indicators and Projector ConditionCompatible Computer Specifications FreqKHz Technical Specifications Optional Parts AccessoriesThis cable is used for RGB Scart 21-Pin Video output of video equipmentUSB Connector Series B Configurations of TerminalsTerminal Analog RGB Mini D-sub 15 pin Terminal DVI-IPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Part No 314 6645 1AA6P1P4532-- MT7A

PLC-SU51, PLC-XU58, PLC-XU51 specifications

Sanyo has made significant strides in the field of projectors, and models like the PLC-XU51, PLC-XU58, and PLC-SU51 showcase the company’s commitment to quality and performance in diverse presentation environments. These models are designed to meet the needs of both educational and business settings, providing reliable, high-quality projection capabilities.

The Sanyo PLC-XU51 is known for its solid performance, offering XGA resolution of 1024 x 768 pixels, which ensures clear and detailed visuals. With a brightness of 3000 lumens, this projector excels in both dim and well-lit rooms, making it a versatile choice for different scenarios. The projector employs a 3LCD technology that enhances color accuracy and delivers vivid images, minimizing the rainbow effect often associated with single-chip DLP projectors. Additionally, the PLC-XU51 features a contrast ratio of 500:1, which allows for deep blacks and bright highlights, ensuring that presentations stand out.

Similarly, the PLC-XU58 builds on the strengths of the XU51 but offers even higher brightness at 4000 lumens, making it suitable for larger venues or spaces with significant ambient light. This model maintains the same XGA resolution, but the enhanced brightness ensures that images remain vibrant and clear, regardless of the lighting conditions. The PLC-XU58 also integrates advanced features like an automatic vertical keystone correction, which simplifies setup and alignment, ensuring that presentations appear straight and accurate.

The Sanyo PLC-SU51 diverges slightly with its enhanced SXGA+ resolution of 1400 x 1050 pixels, making it ideal for high-definition presentations. This projector is particularly advantageous for users requiring finer detail in their visuals, such as architects or graphic designers. The PLC-SU51 also boasts a brightness of 3000 lumens, complemented by a 600:1 contrast ratio, offering impressive image quality even in challenging lighting situations.

All three models come equipped with a variety of connectivity options, including HDMI, VGA, and audio inputs, allowing seamless integration with a range of devices. Furthermore, they feature a built-in speaker and remote control, enhancing user experience during presentations. The compact design and light weight of these projectors make them portable and easy to set up in various environments.

In summary, the Sanyo PLC-XU51, XU58, and SU51 projectors represent a blend of high performance, flexibility, and ease of use. Their advanced technologies, such as 3LCD for enhanced color reproduction, and high brightness levels, make them a reliable choice for educators and business professionals alike, ensuring that every presentation is delivered with clarity and impact.
Top Page Image Contents