Sanyo PLC-XU50, PLC-XU55, PLC-SU50 owner manual Computer Input, Input Source Selection

Page 24

Computer Input

Input Source Selection

Direct Operation

Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Computer 1

Computer 2

Video

COMPUTER button Computer 1

Computer 2

Menu Operation

1

Press the MENU button and the On-Screen Menu will appear.

 

Press the Point Left/Right button to move the red frame pointer

 

to the Input Menu icon.

2

Press the Point Down button to move the red arrow pointer to

 

either Computer 1 or Computer 2 (Only the Computer 1 is

 

displayed when Monitor out is selected in the Setting Menu.),

 

and then press the SELECT button. The Source Select Menu

 

will appear.

 

3

Move the pointer to the correct input source and then press the

 

SELECT button.

 

When the input source is analog coming from a

RGB (Analog)

 

 

 

 

computer through the DVI terminal, select RGB

 

 

 

 

 

 

(Analog).

 

 

When the input source is digital coming from a

RGB (PC Digital)

 

 

 

 

computer through the DVI terminal, select RGB (PC

 

 

 

 

 

 

Digital)

 

When the input source compatible with HDCP is

RGB (AV HDCP)

 

 

 

 

coming from video equipment through the DVI

 

 

 

 

 

 

terminal, select RGB (AV HDCP).

 

 

 

When the input source is analog coming from a

RGB

 

 

 

 

 

computer through the COMPUTER IN

 

 

 

 

 

 

2/COMPONENT IN/MONITOR OUT terminal, select

 

 

 

RGB.

Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out.

Input Menu

Input Menu icon

Move the pointer (red arrow)

to Computer 1 and press the

Computer SELECT button.

1

Source Select Menu

Move the pointer to RGB(Analog), RGB (PC Digital), or RGB(AV HDCP) and press the SELECT but- ton.

Computer 2 is not displayed when the COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal is used as Monitor out.

Input Menu

Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Source Select Menu

Move the pointer to RGB and press the SELECT button.

NOTE

HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied.

The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

24

Image 24
Contents Model PLC-XU55 PLC-XU50 PLC-SU50 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorCompliance Federal Communication Commission NoticeCompliance For Continental Europe For the U.KFor the U.S.A. and Canada 200 240 V ACFeatures and Design Part Names and Functions FrontBack BottomPart Names and Functions TerminalPower ON-OFF button TopRemote Control Signal Emission indicatorLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationInstallation Adjustable FeetPositioning the Projector Installation Connecting to a ComputerConnecting to Video Equipment TerminalsProjector Basic Operation Turning On the ProjectorTurning Off the Projector Zoom Adjustment Focus AdjustmentKeystone Adjustment Basic OperationTimer Function Sound AdjustmentNo Show Function Direct OperationRemote Control On-Screen MenuTop Control On-Screen MenuMenu Bar Computer Input Input Source SelectionComputer Input Computer System SelectionAuto ModeComputer Adjustment Auto To store adjustment dataAuto PC Adj Computer Adjustment Manual Reset Mode freeDisplay area To store adjustment data To clear adjustment dataImage Level Selection StandardReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Video AutoVideo Input Input Source Selection Component, RGB Scart 21-PinComponent RGB Scart Input button Computer Video Computer buttonVideo System Selection Video or S-VideoComponent AV System Menu Video or S-VideoCinema Image button Standard CinemaColor TintProgressive Resets all adjustment to their previous figure Setting SettingSetting To change the code for the remote control To change the code for the projectorMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the items below Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterPOA-LMP55 for PLC-XU55/PLC-XU50 POA-LMP65 for PLC-SU50When the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionPC Adjust Image Select Image Adjust ScreenMenu Tree Input575pSetting Image SelectCompatible Computer Specifications FreqKHz Technical Specifications Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Pin Configuration Optional Parts Attaching the Lens Cover Page Part No 308 4688 1AA6P1P4129-- MT3A

PLC-SU50, PLC-XU55, PLC-XU50 specifications

The Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 projectors are part of Sanyo's commitment to delivering high-quality projection solutions for various environments, including classrooms, conference rooms, and home theaters. Each model offers distinct features and technologies tailored to meet diverse projection needs, while maintaining Sanyo’s reputation for reliability and performance.

The Sanyo PLC-XU50 is a versatile projector that boasts a high brightness of 3500 ANSI lumens, making it ideal for well-lit rooms. This model utilizes a 3LCD technology, which ensures vibrant colors and sharp images. With a native resolution of XGA (1024x768), it is capable of displaying detailed presentations and videos. The PLC-XU50 also incorporates Sanyo's Robust Color technology, enhancing color reproduction accuracy across various content types. Additionally, it features a long-lasting lamp life of up to 4000 hours in eco mode, providing cost-efficiency and minimizing maintenance needs.

The Sanyo PLC-XU55 takes the performance a step further with enhanced brightness of 4000 ANSI lumens, making it suitable for larger venues or environments with significant ambient light. Like the PLC-XU50, it utilizes 3LCD technology, ensuring vivid and realistic colors. The PLC-XU55 supports a higher resolution of XGA and offers advanced connectivity options, including HDMI, making it compatible with a wide range of devices. Its dynamic contrast ratio further boosts image depth, making images more engaging for audiences.

Sanyo's PLC-SU50 is designed with sleek aesthetics and advanced features catering to both business and educational use. Operating at a brightness of 3500 ANSI lumens, the PLC-SU50 complements spaces that require good illumination while also empowering users with a resolution of SXGA (1280x1024), which enhances the quality of projected content. This model includes features such as a built-in speaker for audio output and an auto vertical keystone correction, making setup quick and straightforward.

All three projectors prioritize user-friendliness, equipped with an easy-to-navigate menu system and various input options to ensure compatibility with numerous devices. Their compact designs make them portable and easy to install in various settings, catering to users on the move.

In summary, the Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 offer cutting-edge features, adaptable to different projection requirements. Their focus on brightness, color accuracy, and user convenience positions them as excellent choices for any projection scenario.