Sanyo PLC-SU50, PLC-XU50 Lamp Replace Counter, When the lamp replace counter is reset, the Lamp

Page 44

Maintenance and Cleaning

Lamp Replace Counter

Be sure to reset the lamp replace counter after the lamp is replaced. REPLACE indicator stops lighting.

1

Turn the projector on, press the MENU button and the On-

 

Screen Menu will appear. Press the Point Left/Right button

 

to move the red frame pointer to the Setting Menu icon.

2

Press the Point Down button to move the red frame pointer

 

to the Lamp counter reset item and then press the SELECT

 

button. The message "Lamp replace counter Reset?" is

 

displayed. Move the pointer to [Yes] and then press the

 

SELECT button.

3

Another confirmation dialog box appears and select [Yes] to

 

reset the Lamp replace counter.

NOTE

●Do not reset the Lamp replace counter without implementation of lamp replacement. Be sure to reset the Lamp replace counter only after replacing the lamp.

When the lamp replace counter is reset, the LAMP

Move the pointer to Lamp counter reset and then press the SELECT button. The message “Lamp replace counter Reset?” is displayed.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.

( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Model PLC-XU55 PLC-XU50 PLC-SU50 Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSafety Instructions Installing the Projector in Proper PositionAir Circulation Moving the ProjectorCompliance Federal Communication Commission NoticeCompliance For Continental Europe For the U.KFor the U.S.A. and Canada 200 240 V ACFeatures and Design Part Names and Functions FrontBack BottomPart Names and Functions TerminalPower ON-OFF button TopRemote Control Signal Emission indicatorLaser Pointer Function Pointer FunctionRemote Control Code Wireless Mouse OperationRemote Control Operating Range Remote Control Batteries InstallationPositioning the Projector InstallationAdjustable Feet Installation Connecting to a ComputerProjector Connecting to Video EquipmentTerminals Turning Off the Projector Basic OperationTurning On the Projector Zoom Adjustment Focus AdjustmentKeystone Adjustment Basic OperationTimer Function Sound AdjustmentNo Show Function Direct OperationRemote Control On-Screen MenuTop Control On-Screen MenuMenu Bar Computer Input Input Source SelectionComputer Input Computer System SelectionAuto ModeAuto PC Adj Computer Adjustment AutoTo store adjustment data Computer Adjustment Manual Reset Mode freeDisplay area To store adjustment data To clear adjustment dataImage Level Selection StandardReal Image button Standard RealImage Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput button Video Computer Video button Video AutoVideo Input Input Source Selection Component, RGB Scart 21-PinComponent RGB Scart Input button Computer Video Computer buttonVideo System Selection Video or S-VideoComponent AV System Menu Video or S-VideoCinema Image button Standard CinemaProgressive ColorTint Resets all adjustment to their previous figure Setting SettingSetting To change the code for the remote control To change the code for the projectorThen check the items below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Maintenance and Cleaning Cleaning the Air FiltersCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the Lamp replace counterPOA-LMP55 for PLC-XU55/PLC-XU50 POA-LMP65 for PLC-SU50When the lamp replace counter is reset, the Lamp Lamp Replace CounterTroubleshooting AppendixAppendix Indicators and Projector Condition Projector ConditionPC Adjust Image Select Image Adjust ScreenMenu Tree Input575pSetting Image SelectKHz Compatible Computer SpecificationsFreq Technical Specifications Terminal DVI-I Pin Configuration Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Optional Parts Attaching the Lens Cover Page Part No 308 4688 1AA6P1P4129-- MT3A

PLC-SU50, PLC-XU55, PLC-XU50 specifications

The Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 projectors are part of Sanyo's commitment to delivering high-quality projection solutions for various environments, including classrooms, conference rooms, and home theaters. Each model offers distinct features and technologies tailored to meet diverse projection needs, while maintaining Sanyo’s reputation for reliability and performance.

The Sanyo PLC-XU50 is a versatile projector that boasts a high brightness of 3500 ANSI lumens, making it ideal for well-lit rooms. This model utilizes a 3LCD technology, which ensures vibrant colors and sharp images. With a native resolution of XGA (1024x768), it is capable of displaying detailed presentations and videos. The PLC-XU50 also incorporates Sanyo's Robust Color technology, enhancing color reproduction accuracy across various content types. Additionally, it features a long-lasting lamp life of up to 4000 hours in eco mode, providing cost-efficiency and minimizing maintenance needs.

The Sanyo PLC-XU55 takes the performance a step further with enhanced brightness of 4000 ANSI lumens, making it suitable for larger venues or environments with significant ambient light. Like the PLC-XU50, it utilizes 3LCD technology, ensuring vivid and realistic colors. The PLC-XU55 supports a higher resolution of XGA and offers advanced connectivity options, including HDMI, making it compatible with a wide range of devices. Its dynamic contrast ratio further boosts image depth, making images more engaging for audiences.

Sanyo's PLC-SU50 is designed with sleek aesthetics and advanced features catering to both business and educational use. Operating at a brightness of 3500 ANSI lumens, the PLC-SU50 complements spaces that require good illumination while also empowering users with a resolution of SXGA (1280x1024), which enhances the quality of projected content. This model includes features such as a built-in speaker for audio output and an auto vertical keystone correction, making setup quick and straightforward.

All three projectors prioritize user-friendliness, equipped with an easy-to-navigate menu system and various input options to ensure compatibility with numerous devices. Their compact designs make them portable and easy to install in various settings, catering to users on the move.

In summary, the Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 offer cutting-edge features, adaptable to different projection requirements. Their focus on brightness, color accuracy, and user convenience positions them as excellent choices for any projection scenario.
Top Page Image Contents