Sanyo PLC-XU50, PLC-XU55, PLC-SU50 owner manual To the Owner, Risk of Electric Shock Do not Open

Page 3

To the Owner

Before operating this projector, read this manual thoroughly and operate the projector properly.

This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time.

Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.

If your projector seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the “Troubleshooting” section at the end of this booklet. If the problem still persists, contact the dealer where you purchased the projector or the service center.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH THIS UNIT.

Safety Precaution

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

–This projector produces intense light from the projection lens. Do not stare directly into the lens as possible. Eye damage could result. Be especially careful that children do not stare directly into the beam.

–Install the projector in a proper position. If not, it may result in a fire hazard.

–Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector. Minimum clearance must be maintained. If the projector is to be built into a compartment or similarly enclosed, the minimum distances must be maintained. Do not cover the ventilation slot on the projector. Heat build- up can reduce the service life of your projector, and can

also be dangerous.

SIDE and TOP

REAR

20cm

 

 

 

 

 

 

 

 

 

 

50cm

 

50cm

 

 

 

50cm

 

 

 

 

 

 

 

–The remote control, supplied to this projector, emits a laser beam as the Laser pointer function from laser light window while pressing the LASER button (for 1 minute / Signal Emission indicator lights red to indicate laser emission). Do not look into the laser light window or shine the laser beam on a mirror, yourself or other people. Eye damage may result.

–Do not put any flammable object or spray can near the projector, hot air is exhausted from the ventilation holes.

–If the projector is not to be used for an extended time, unplug the projector from the power outlet.

READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model PLC-XU55 PLC-XU50 PLC-SU50 Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Safety InstructionsInstalling the Projector in Proper Position Air CirculationFederal Communication Commission Notice Compliance200 240 V AC ComplianceFor Continental Europe For the U.K For the U.S.A. and CanadaFeatures and Design Bottom Part Names and FunctionsFront BackTerminal Part Names and FunctionsTop Power ON-OFF buttonSignal Emission indicator Remote ControlPointer Function Laser Pointer FunctionWireless Mouse Operation Remote Control CodeRemote Control Batteries Installation Remote Control Operating RangeInstallation Adjustable FeetPositioning the Projector Connecting to a Computer InstallationConnecting to Video Equipment TerminalsProjector Basic Operation Turning On the ProjectorTurning Off the Projector Basic Operation Zoom AdjustmentFocus Adjustment Keystone AdjustmentDirect Operation Timer FunctionSound Adjustment No Show FunctionOn-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar Input Source Selection Computer InputMode Computer InputComputer System Selection AutoComputer Adjustment Auto To store adjustment dataAuto PC Adj Computer Adjustment Manual To clear adjustment data ResetMode free Display area To store adjustment dataImage button Standard Real Image Level SelectionStandard RealImage Level Adjustment Screen Size Adjustment Auto Video InputInput Source Selection Video, S-Video Input button Video Computer Video button VideoInput button Computer Video Computer button Video InputInput Source Selection Component, RGB Scart 21-Pin Component RGB ScartAV System Menu Video or S-Video Video System SelectionVideo or S-Video ComponentImage button Standard Cinema CinemaColor TintProgressive Resets all adjustment to their previous figure Setting SettingSetting To change the code for the projector To change the code for the remote controlMaintenance and Cleaning Projector is shut down and the Warning indicator lights redThen check the items below Cleaning the Projector Cabinet Maintenance and CleaningCleaning the Air Filters Cleaning the Projection LensPOA-LMP65 for PLC-SU50 Lamp ReplacementReset the Lamp replace counter POA-LMP55 for PLC-XU55/PLC-XU50Lamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Projector Condition Indicators and Projector ConditionInput PC AdjustImage Select Image Adjust Screen Menu TreeImage Select 575pSettingCompatible Computer Specifications FreqKHz Technical Specifications Configurations of Terminals Terminal HDB15-PIN Pin ConfigurationTerminal DVI-I Pin Configuration Optional Parts Attaching the Lens Cover Page Part No 308 4688 1AA6P1P4129-- MT3A

PLC-SU50, PLC-XU55, PLC-XU50 specifications

The Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 projectors are part of Sanyo's commitment to delivering high-quality projection solutions for various environments, including classrooms, conference rooms, and home theaters. Each model offers distinct features and technologies tailored to meet diverse projection needs, while maintaining Sanyo’s reputation for reliability and performance.

The Sanyo PLC-XU50 is a versatile projector that boasts a high brightness of 3500 ANSI lumens, making it ideal for well-lit rooms. This model utilizes a 3LCD technology, which ensures vibrant colors and sharp images. With a native resolution of XGA (1024x768), it is capable of displaying detailed presentations and videos. The PLC-XU50 also incorporates Sanyo's Robust Color technology, enhancing color reproduction accuracy across various content types. Additionally, it features a long-lasting lamp life of up to 4000 hours in eco mode, providing cost-efficiency and minimizing maintenance needs.

The Sanyo PLC-XU55 takes the performance a step further with enhanced brightness of 4000 ANSI lumens, making it suitable for larger venues or environments with significant ambient light. Like the PLC-XU50, it utilizes 3LCD technology, ensuring vivid and realistic colors. The PLC-XU55 supports a higher resolution of XGA and offers advanced connectivity options, including HDMI, making it compatible with a wide range of devices. Its dynamic contrast ratio further boosts image depth, making images more engaging for audiences.

Sanyo's PLC-SU50 is designed with sleek aesthetics and advanced features catering to both business and educational use. Operating at a brightness of 3500 ANSI lumens, the PLC-SU50 complements spaces that require good illumination while also empowering users with a resolution of SXGA (1280x1024), which enhances the quality of projected content. This model includes features such as a built-in speaker for audio output and an auto vertical keystone correction, making setup quick and straightforward.

All three projectors prioritize user-friendliness, equipped with an easy-to-navigate menu system and various input options to ensure compatibility with numerous devices. Their compact designs make them portable and easy to install in various settings, catering to users on the move.

In summary, the Sanyo PLC-XU50, PLC-XU55, and PLC-SU50 offer cutting-edge features, adaptable to different projection requirements. Their focus on brightness, color accuracy, and user convenience positions them as excellent choices for any projection scenario.
Top Page Image Contents