Video Input
Input Source Selection (Component, RGB Scart
Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER 1 or the COMPONENT button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described below.
Remote Control
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Computer 1
(Component)
Top Control
INPUT button
Computer 1(RGB) / (Component) / (RGB(Scart))
Computer 2(RGB)
Video
Menu Operation | Input Menu | ||
1 | Press the MENU button to display the | ||
| |||
| Menu. Use the Point ed buttons to select Input and |
| |
| then press the Point 8 or the SELECT button. |
| |
2 | Use the Point ed buttons to select Computer 1 and |
| |
| then press the Point 8 button. |
| |
3 | Use the Point ed buttons to select Component or |
| |
| RGB(Scart) and then press the SELECT button. |
|
Component
RGB (Scart)
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).
✔Note:
When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.45).
38