Sanyo PLC-XU350K Safety Instructions Air Circulation, Installing the Projector in Proper Position

Page 6

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.

Keep the exhaust vent at least 3’ (1 m) away from any objects.

Do not touch a peripheral part of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.

Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

Air intake Vent

Exhaust Vent

 

Air Intake Vent

(Hot air exhaust)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce the lamp life and cause a fire hazard.

20°

 

 

 

 

Do not tilt the projector more than 20

 

 

 

 

 

 

 

 

 

 

degrees from side to side.

 

 

 

 

 

 

 

20°

 

 

 

 

 

30°

 

 

 

 

Do not tilt the projector more than 30

 

 

 

 

 

 

degrees from above and below.

 

 

 

 

 

 

30°

 

 

 

 

 

Do not point the projector up to project an image.

Do not point the projector down to project an image.

Do not put the projector on either side to project an image.

Moving the Projector

When moving the projector, replace the lens cap and retract adjustable feet to prevent damage to the lens and cabinet.

When the projector is not in use for an extended period, put it into a suitable case with the lens side up.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

Do not drop or bump the projector, otherwise damages or malfunctions may result.

–When carrying the projector, use a suitable carrying case.

–Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–Do not put the projector in a case before the projector is cooled enough.

Air Intake Vent

Exhaust Vent (Hot air exhaust)

Image 6
Contents Model PLC-XU300 PLC-XU350 PLC-XU300K PLC-XU350K Network SupportedFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United Kingdom AC Power Cord RequirementAC Power Cord for the United States and Canada ComplianceBack⑦ ⑧ Part Names and FunctionsFront BottomPart Names and Functions ④ LAN Connection Terminal⑤ Power indicator ② Point ed 7 8 Volume +/- buttons ⑦ Auto Setup button⑧ Warning indicator ⑨ Lamp Replace indicatorPart Names and Functions Remote Control ⑤ S-VIDEO buttonRemote Control Operating Range Remote Control CodeInstallation Adjustable FeetPositioning the Projector Installation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K Basic Operation Turning On the ProjectorSelected Input Source and Lamp Control Enter a PIN code What is PIN code?Basic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Top Control Basic Operation How to Operate the On-Screen MenuRemote Control On-Screen MenuBasic Operation Menu Bar For detailed functions of each menu, see Menu Tree on pagesBasic Operation Zoom and Focus Adjustment Auto Setup FunctionKeystone Correction Basic Operation Sound Adjustment Direct OperationMenu Operation Basic Operation Remote Control Operation Image button Timer buttonNo Show button Screen buttonComputer Input Input MenuComputer Input Input Source Selection Computer 2 RGB Input MenuComputer Input Computer System Selection Selecting Computer System ManuallyPC System Menu To store adjustment parameters Computer Input Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Computer Input ResetMode free StoreComputer Input Image Mode Selection Image Select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuFor zooming in and out the images Digital zoom + CustomPosition H/V Digital zoomVideo Input Input Source Selection Video, S-videoVideo Component RGB Scart Component Video Input Video System SelectionAV System Menu Video or S-video AV System Menu ComponentVideo Input Image Mode Selection CinemaVideo Input Image Adjustment ColorTint Noise reduction Video InputStore Menu ProgressiveVideo Input Screen Size Adjustment Setting Menu Language SettingSetting LanguageInput search Auto setupAuto setup Auto KeystoneBackground Power off? p.20Keystone DisplayDefault Capture Logo PIN code lock CaptureLogo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Logo PIN code change Logo PIN code changeTerminal CeilingRear ComputerPower management Standby mode On startClosed Caption Lamp life control Remote control Lamp controlKey lock Key lock PIN code lockSecurity Key lock and PIN code lock PIN code lockChange the PIN code lock setting PIN code changeEnter a PIN code Change the PIN code Fan control Filter counterFan Filter counterFactory default Direct Operation InformationInput Source Information Display Menu OperationIndicator lights red Maintenance and CleaningIndicator is blinking red Projector is shut down and the WarningMaintenance and Cleaning Cleaning the Filters Resetting the Filter CounterMaintenance and Cleaning Attaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Service Parts No 343 Maintenance and CleaningReplacement Lamp Type No POA-LMP131 Model No.. of your projector PLC-XU300, PLC-XU350Troubleshooting AppendixNo sound AppendixNo image Color is strangeImage is distorted or runs off Remote Control doesIndicator blinks or lights PIN code dialog box appearsAppendix Sound Appendix Menu TreeComputer Input/Video Input Computer InputSetting Video InputAppendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionAppendix Technical Specifications Optional Parts Appendix PJ Link Notice Appendix Configurations of Terminals Control Port Connector D-sub 9 pinTerminal Analog RGB Mini D-sub 15 pin Appendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Appendix Dimensions Unit mminchAppendix KF5AC

PLC-XU350K, PLC-XU300K, PLC-XU300, PLC-XU350 specifications

The Sanyo PLC-XU350, PLC-XU300, PLC-XU300K, and PLC-XU350K are a series of high-performance projectors designed to meet the needs of various environments, including educational institutions, corporate settings, and large venues. These projectors are known for their advanced technologies, reliability, and user-friendly features, making them suitable for a variety of applications.

The Sanyo PLC-XU350 and PLC-XU300 projectors feature a native XGA resolution (1024x768), which ensures sharp and clear images, ideal for presentations, lectures, and meetings. With brightness levels of up to 3500 lumens for the PLC-XU350 and 3000 lumens for the PLC-XU300, these projectors deliver vibrant colors and crisp details even in well-lit rooms.

One of the standout technologies in these models is the use of LCD (Liquid Crystal Display) panels. LCD technology offers excellent color reproduction and can produce a wider color gamut, resulting in beautiful, lifelike images. The projectors also include a high contrast ratio, further enhancing the image quality by providing deeper blacks and more vivid colors.

Portability is a key advantage of the PLC-XU series. Weighing less than 10 pounds, these projectors are easy to transport between rooms, making them ideal for mobile presentations. Moreover, the integrated lens shift and zoom functions allow for flexible installation options, accommodating various screen sizes and room layouts.

Connectivity options are abundant in the Sanyo PLC-XU350 and PLC-XU300 models. They feature multiple input interfaces including VGA, HDMI, and composite video, ensuring compatibility with a wide range of devices such as laptops, DVD players, and video game consoles. The addition of a USB port enables easy plug-and-play capabilities for presentations directly from USB flash drives.

The PLC-XU300K and PLC-XU350K models also cater to specific needs by incorporating unique features like a built-in speaker, providing an all-in-one solution for small to mid-sized venues without the need for additional sound equipment.

In terms of longevity, these projectors are equipped with advanced lamp technology designed to enhance lifespan and reduce maintenance costs. With proper care, the lamps can last for several thousand hours, ensuring reliable performance throughout their usage.

In conclusion, the Sanyo PLC-XU350, PLC-XU300, PLC-XU300K, and PLC-XU350K stand out as robust projection solutions packed with features that offer versatility, quality, and convenience. Whether in a classroom, boardroom, or theater, these projectors deliver sharp visuals and ease of use, making them a smart choice for anyone looking to enhance their visual presentations.