Video Input
Image Adjustment
1 | Press the MENU button to display the |
| Menu. Use the Point ed buttons to select the Image |
| Adjust and then press the Point 8 or the SELECT |
| button. |
2 | Use the Point ed buttons select the desired item |
| and then press the SELECT button to display the |
adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button decrease the intensity of the color; press the Point 8 button increase the intensity of the color (from 0 to 63).
Tint
Press the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).
Color temp..
Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63).
✔Note:
Image Adjust Menu
Selected Image mode
Use the Point 7 8 buttons to adjust the setting value.
•When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to User.
•Tint cannot be selected when the video system is PAL, SECAM,
•When Blackboard(Green) or Colorboard is selected in Image select, Color temp.. will change to Blackboard or Colorboard.
41