Sanyo PLC-XTC50L owner manual Change the PIN code lock setting, Enter a PIN code

Setting

PIN code lock

This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security.

Off	Unlocked.
On1	Enter the PIN code every time turning on
	the projector.
On2	Enter the PIN code to operate the projector
	once the power cord is disconnected; as
	long as the AC power cord is connected,
	the projector can be operated without a
	PIN code.

Whenever you change the PIN code lock setting or the PIN code (the four-digit number), you are required to enter the PIN code. The “1234” is set as the initial PIN code at the factory.

If you want to change the PIN code lock setting, Press the SELECT button and the PIN code dialog box appears. Enter a PIN code by following the steps below.

Enter a PIN code

Use the Point ed buttons on the top control or Number buttons on the remote control to enter a number.

When using top control

Use the Point ed buttons on the top control to select a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳.” Repeat this step to complete entering a four-digit number. After entering the four-digit number, move the pointer to “Set.” Press the SELECT button so that you can change the PIN code lock setting.

When using remote control

Press the Number buttons on the remote control to enter a number (p.15). When you complete entering a four-digit number, the pointer moves to “Set.” Press the SELECT button so that you can change the PIN code lock setting.

If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

If you entered an incorrect PIN code, “PIN code” and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

Change the PIN code lock setting

Use the Point 7 8 button to select Off, On1, or On2 and then move the pointer to “Quit” with the Point d button. Press the SELECT button to close the dialog box.

PIN code lock

When the projector is locked with a PIN code, the PIN code lock symbol appears on the menu bar.

Enter a PIN code

After a correct PIN code is entered, the following dialog box appears.

Change the PIN code lock setting

Use the Point 7 8 buttons to switch between the options.

57