Sanyo PLC-XT10, PLC-XT15 owner manual TOP Controls and Indicators, Lamp Replace Indicator

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

TOP CONTROLS

AND INDICATORS

LAMP REPLACE INDICATOR

Turns yellow when the life of the projection lamp draws to an end. (P38)

WARNING TEMP. INDICATOR

Flashes red when

internal projector temperature is too high. (P41)

READY INDICATOR

Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P37)

LAMP INDICATOR

Becomes dim when the projector is turned on. And it is bright when the projector is in stand-by mode.

POINT (VOLUME + / – ) BUTTONS

Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan the image in DIGITAL ZOOM +/– mode. (P30)

POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons. (P21)

INPUT BUTTON

Used to select input source. (P22, 31)

IMAGE BUTTON

Used to select image level. (P28, 33)

ZOOM BUTTON

Used to adjust zoom. (P20)

FOCUS BUTTON

Used to adjust focus. (P20)

ON-OFF

SELECT

POWER ON–OFF BUTTON

Used to turn the projector on or off. (P19)

SELECT BUTTON

Used to execute the item selected. It is also used to expand / compress the image in DIGITAL ZOOM mode. (P30)

MENU BUTTON

Used to open or close MENU operation. (P17, 18)

AUTO PC ADJ. BUTTON

Use to operate AUTO PC

Adjustment function. (P25)

KEYSTONE

KEYSTONE BUTTON

Used to correct keystone distortion. (P20, 36)

LENS SHIFT BUTTON

Used to select LENS

SHIFT function. (P20)

16