Sanyo PLC-XW65K owner manual Using the ferrite core, Connecting the AC Power Cord, Projector side

Page 14

Installation

Using the ferrite core

Before using the AC Power Cord, attach the ferrite core (supplied) as shown in the figure. The Power Cord with ferrite core must be used for RF interference suppression.

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.

Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See pages 15-17 for connection.)

CAUTION

The AC outlet must be near this equipment and must be easily accessible.

✔Note:

Ferrite Core

0.39" (10 mm)

AC Power Cord

Keep closing until it makes a clicking sound.

Connect the AC power cord (supplied) to the projector.

Unplug the AC power cord when the projector is not in use. When this projector is connected to an outlet with the AC power cord, it is in Stand-by mode and consumes a little electric power.

NOTE ON THE POWER CORD

AC power cord must meet requirement of the country where you use the projector. Confirm the AC plug type with the chart below and proper AC power cord must be used. If supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

 

AC outlet side

 

 

For the U..S..A.. and Canada

For Continental Europe

For the U..K..

 

Ground

 

 

To power cord

To the AC outlet.

 

 

connector on your

To the AC outlet.

To the AC outlet.

(120 V AC)

projector.

(200 - 240 V AC)

(200 - 240 V AC)

 

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model PLC-XW65 PLC-XW65K Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communications Commission NoticeBack Bottom Part Names and FunctionsFront Air Intake Vent front and bottomRear Terminal Top Control Remote Control Two AA size batteries Remote Control Battery InstallationOperating Range Positioning the Projector InstallationAdjustable Foot Projector side Using the ferrite coreConnecting the AC Power Cord Connecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video and RGB Scart Equipment Basic Operation Selected Input Source and Lamp ModeVideo / PC selection window Input signal guidance window Turning On the ProjectorBasic Operation PIN Code Input Dialog BoxTurning Off the Projector Top Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto setup function Sound Adjustment Remote Control OperationZoom buttons Timer buttonAuto PC button Keystone buttonDirect Operation Computer InputInput Source Selection Source Select MenuSelecting Computer System Manually Computer System SelectionPC System Menu Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment To clear adjusted data ResetMode free To store adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment True Screen Size AdjustmentNormal Custom WideFull Digital zoom For zooming in and out the imagesDigital zoom + Zoom buttonVideo button Video InputInput Source Selection Video Input Source Selection S-video, Component, RGB Scart 21-pin Video Component RGB ScartAV System Menu Video or S-video Video System SelectionAuto AV System Menu ComponentCinema User preset image in the Image Adjust Menu. p.43 Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting Menu Language SettingSetting LanguageAuto Keystone Auto setupInput search Display KeystoneBlue back Capture Logo Logo and Logo PIN code lock settingsLogo select Logo select CaptureLogo PIN code lock Logo PIN code lock Logo PIN code lock Dialog BoxRear Standby modeCeiling TerminalOn start Remote control PIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingEnter a PIN code Fan Fan controlLamp counter Factory defaultClosed Caption Factory default Then check the matters below Maintenance and CleaningIndicator emits a red light Projector is shut down and the WarningCleaning the Air Filter Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Order Replacement Lamp Reset the lamp replacement counterLamp Handling Precautions Resetting the Lamp CounterTroubleshooting AppendixPower management function can not work while Freeze or No Show function is running. see pages 24Exclamation mark appears Remote Control does not workIndicator blinks or lights On the screen Top Control does not workInput PC AdjustMenu Tree SoundScreen Image Select Image AdjustSystem Image Select Setting Indicators and Projector Condition Indicators Projector ConditionCompatible Computer Specifications FreqTechnical Specifications Optional Parts Service Port Connector Terminal Mini DIN 8-PIN Configurations of TerminalsDimensions SerialLogo PIN Code Lock No PIN Code Number MemoKT7AC

PLC-XW65K specifications

The Sanyo PLC-XW65K is a high-performance LCD projector designed to meet the needs of both educational institutions and business environments. It offers exceptional image quality combined with advanced features that enable seamless presentations and dynamic visual content display.

At the heart of the PLC-XW65K is its remarkable brightness capability, boasting an impressive brightness rating of 6000 lumens. This feature allows for clear and vivid images, even in well-lit environments. Whether you are presenting in a classroom, conference room, or auditorium, the projector ensures that images remain sharp and easily viewable from various distances.

The PLC-XW65K utilizes a native XGA resolution of 1024 x 768, which facilitates crisp detail and accurate colors. Its 3LCD technology further enhances image quality by delivering balanced color reproduction and eliminating the "rainbow effect" often seen in DLP projectors. This makes the projector perfect for displaying a range of content, from detailed graphs and charts to vibrant visuals in multimedia presentations.

Connectivity is another key feature of the Sanyo PLC-XW65K. It comes equipped with multiple input options, including HDMI, VGA, and composite video inputs, ensuring compatibility with various devices, such as laptops, Blu-ray players, and document cameras. Additionally, it supports a variety of image formats, making it versatile for different usage scenarios.

One of the standout characteristics of the PLC-XW65K is its advanced lens technology. It features a powerful zoom function and a wide lens shift capability, allowing users to position the projector flexibly within a room. This ensures that installation is straightforward and that you can achieve the desired image size and position without distortion.

Also noteworthy is the Sanyo PLC-XW65K's built-in image adjustment features, including keystone correction and color management settings. These functionalities allow users to optimize the image to fit various screen sizes and environments effortlessly.

In terms of durability, the projector is constructed with high-quality materials designed for long-term use. It incorporates a highly efficient cooling system, which not only prevents overheating but also extends the lifespan of the lamp. The lamp life can reach up to 5,000 hours in eco mode, reducing the frequency of replacements and maintenance.

Overall, the Sanyo PLC-XW65K stands out as a reliable and efficient projector that provides superior image quality, advanced features, and robust performance, making it an excellent choice for professional presentations and educational settings.
Top Page Image Contents