Sanyo PLC-XW65K owner manual Appendix, Troubleshooting

Page 63

Appendix

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

Make sure you have properly connected the projector to peripheral equipment as described on pages15-17.

Make sure all equipment is connected to AC outlet and the power is turned on.

When you operate the projector with a computer and it does not project an image, restart the computer.

Problem

– Solutions

 

 

No power

– Plug the power cord of the projector into the AC outlet.

 

– See if the POWER indicator lights red.

 

– Wait until the POWER indicator stops blinking to turn on the

 

projector again. The projector can be turned on after the POWER

 

indicator turns red. (See page 20)

 

– Check the WARNING indicator. If the WARNING indicator lights

 

red, the projector cannot be turned on. (See page 57)

 

– Check the projection lamp. (See page 60)

 

– Unlock the Key lock function. (See page 53)

The initial display is not shown..

Make sure "Off" or "Countdown off" are not chosen at display function.(see page 47)

The initial display is not same as

– Make sure "User" or "Off" are not chosen at Logo (select) as the

the default set..

default set. function. (see page 48)

 

 

Input signal switches

– Make sure Input search function is adjusted properly. (See page

automatically.. (or does not

46)

switch automatically)

 

 

 

Image is out of focus

– Adjust the focus of the projector. (See page 23)

 

– Provide proper distance between the projector and the projection

 

screen. (See page 13)

 

– Check the projection lens to see if it needs cleaning. (See page 59)

 

– Moving the projector from a cool to warm place may result in

 

moisture condensation on the projection lens. If this occurs, leave

 

the projector off and wait until condensation evaporates.

 

 

No image

– Check the connection between your computer or video equipment

 

 

and the projector. (See pages 15-17)

 

– See if the input signal is correctly output from your computer. For

 

some laptop computers, you may need to change the setting for the

 

monitor output when connecting to a projector. See your computer’s

 

instruction manual for the setting.

 

– It takes about 30 seconds to display an image after turning on

 

the projector. See if the selected system is corresponding to your

 

computer or video equipment. (See pages 27 and 39)

 

– Select a correct input source once again through menu operation.

 

(See pages 26, 37 and 38)

 

– Make sure the temperature is not out of the specified operating

 

temperature (41°F ~ 95°F (5°C ~ 35°C)).

63

Image 63
Contents Model PLC-XW65 PLC-XW65K Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerSafety Instructions Installing the Projector in Proper Position Air CirculationMoving the Projector Federal Communications Commission Notice ComplianceAir Intake Vent front and bottom Part Names and FunctionsFront Back BottomRear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeTwo AA size batteries Installation Adjustable FootPositioning the Projector Using the ferrite core Connecting the AC Power CordProjector side Cables used for connection Connecting to a ComputerConnecting to Video Equipment Connecting to Component Video and RGB Scart Equipment Turning On the Projector Selected Input Source and Lamp ModeVideo / PC selection window Input signal guidance window Basic OperationPIN Code Input Dialog Box Basic OperationTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Top ControlMenu Bar Zoom and Focus Adjustment Auto setup functionKeystone Correction Remote Control Operation Sound AdjustmentKeystone button Timer buttonAuto PC button Zoom buttonsSource Select Menu Computer InputInput Source Selection Direct OperationComputer System Selection PC System MenuSelecting Computer System Manually Auto PC Adjustment To store adjustment parametersMenu Operation Auto PC Adj Manual PC Adjustment To store adjusted data ResetMode free To clear adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment Screen Size Adjustment NormalTrue Wide FullCustom Zoom button For zooming in and out the imagesDigital zoom + Digital zoomVideo Input Input Source Selection VideoVideo button Video Component RGB Scart Input Source Selection S-video, Component, RGB Scart 21-pinAV System Menu Component Video System SelectionAuto AV System Menu Video or S-videoCinema User preset image in the Image Adjust Menu. p.43 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Language SettingSetting Setting Menu LanguageAuto setup Input searchAuto Keystone Keystone Blue backDisplay Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureLogo PIN code lock Logo PIN code lock Dialog Box Logo PIN code lockTerminal Standby modeCeiling RearOn start Remote control Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock setting Enter a PIN codeChange the PIN code Fan control FanFactory default Closed Caption Factory defaultLamp counter Projector is shut down and the Warning Maintenance and CleaningIndicator emits a red light Then check the matters belowAttaching the Lens Cover Cleaning the Air FilterCleaning the Projector Cabinet Cleaning the Projection LensLamp Replacement Reset the lamp replacement counter Order Replacement LampResetting the Lamp Counter Lamp Handling PrecautionsAppendix TroubleshootingShow function is running. see pages 24 Power management function can not work while Freeze or NoOn the screen Top Control does not work Remote Control does not workIndicator blinks or lights Exclamation mark appearsSound PC AdjustMenu Tree InputImage Select Image Adjust System Image SelectScreen Setting Indicators Projector Condition Indicators and Projector ConditionFreq Compatible Computer SpecificationsTechnical Specifications Optional Parts Serial Configurations of TerminalsDimensions Service Port Connector Terminal Mini DIN 8-PINPIN Code Number Memo Logo PIN Code Lock NoKT7AC

PLC-XW65K specifications

The Sanyo PLC-XW65K is a high-performance LCD projector designed to meet the needs of both educational institutions and business environments. It offers exceptional image quality combined with advanced features that enable seamless presentations and dynamic visual content display.

At the heart of the PLC-XW65K is its remarkable brightness capability, boasting an impressive brightness rating of 6000 lumens. This feature allows for clear and vivid images, even in well-lit environments. Whether you are presenting in a classroom, conference room, or auditorium, the projector ensures that images remain sharp and easily viewable from various distances.

The PLC-XW65K utilizes a native XGA resolution of 1024 x 768, which facilitates crisp detail and accurate colors. Its 3LCD technology further enhances image quality by delivering balanced color reproduction and eliminating the "rainbow effect" often seen in DLP projectors. This makes the projector perfect for displaying a range of content, from detailed graphs and charts to vibrant visuals in multimedia presentations.

Connectivity is another key feature of the Sanyo PLC-XW65K. It comes equipped with multiple input options, including HDMI, VGA, and composite video inputs, ensuring compatibility with various devices, such as laptops, Blu-ray players, and document cameras. Additionally, it supports a variety of image formats, making it versatile for different usage scenarios.

One of the standout characteristics of the PLC-XW65K is its advanced lens technology. It features a powerful zoom function and a wide lens shift capability, allowing users to position the projector flexibly within a room. This ensures that installation is straightforward and that you can achieve the desired image size and position without distortion.

Also noteworthy is the Sanyo PLC-XW65K's built-in image adjustment features, including keystone correction and color management settings. These functionalities allow users to optimize the image to fit various screen sizes and environments effortlessly.

In terms of durability, the projector is constructed with high-quality materials designed for long-term use. It incorporates a highly efficient cooling system, which not only prevents overheating but also extends the lifespan of the lamp. The lamp life can reach up to 5,000 hours in eco mode, reducing the frequency of replacements and maintenance.

Overall, the Sanyo PLC-XW65K stands out as a reliable and efficient projector that provides superior image quality, advanced features, and robust performance, making it an excellent choice for professional presentations and educational settings.