Sanyo PLC-XW65K owner manual Lamp Handling Precautions, Resetting the Lamp Counter

Page 62

Maintenance and Cleaning

Resetting the Lamp Counter

Be sure to reset the Lamp replacement counter after the lamp is replaced. When the Lamp replacement counter is reset, the LAMP REPLACE indicator stops lighting.

1 Turn the projector on, press the MENU button to display the On-Screen Menu. Press the Point  buttons to move the red framed pointer to the Setting Menu icon.

2 Press the Point 54 buttons to move the red framed pointer to the Lamp counter function and then press the SELECT button. The first dialog box appears and shows the total accumulated time of the lamp usage and the reset option. If you select "Reset", a "Lamp replacement counter Reset?" message appears. Select [Yes] to continue.

3 Another confirmation dialog box appears, select [Yes] to reset the Lamp replacement counter.

✔Note:

Do not reset the Lamp replacement counter without implementation of lamp replacement. Be sure to reset the Lamp replacement counter only after replacing the lamp.

To reset the lamp counter, move the pointer to Reset and then press the SELECT button. “Lamp replacement counter Reset?” dialog box is displayed.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the lamp counter.

LAMP HANDLING PRECAUTIONS

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard.

●Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time than other similar lamps.

●If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.

●A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector's AC plug from the AC outlet immediately. Contact an authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken glass.

62

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Model PLC-XW65 PLC-XW65K Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Moving the Projector Installing the Projector in Proper PositionAir Circulation Compliance Federal Communications Commission NoticeBack Bottom Part Names and FunctionsFront Air Intake Vent front and bottomRear Terminal Top Control Remote Control Two AA size batteries Remote Control Battery InstallationOperating Range Positioning the Projector InstallationAdjustable Foot Projector side Using the ferrite coreConnecting the AC Power Cord Connecting to a Computer Cables used for connectionConnecting to Video Equipment Connecting to Component Video and RGB Scart Equipment Basic Operation Selected Input Source and Lamp ModeVideo / PC selection window Input signal guidance window Turning On the ProjectorBasic Operation PIN Code Input Dialog BoxTurning Off the Projector Top Control How to Operate the On-Screen MenuRemote Control On-Screen MenuMenu Bar Keystone Correction Zoom and Focus AdjustmentAuto setup function Sound Adjustment Remote Control OperationZoom buttons Timer buttonAuto PC button Keystone buttonDirect Operation Computer InputInput Source Selection Source Select MenuSelecting Computer System Manually Computer System SelectionPC System Menu Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment To clear adjusted data ResetMode free To store adjusted dataImage Level Selection Image Select Menu icon Image Level Adjustment True Screen Size AdjustmentNormal Custom WideFull Digital zoom For zooming in and out the imagesDigital zoom + Zoom buttonVideo button Video InputInput Source Selection Video Input Source Selection S-video, Component, RGB Scart 21-pin Video Component RGB ScartAV System Menu Video or S-video Video System SelectionAuto AV System Menu ComponentCinema User preset image in the Image Adjust Menu. p.43 Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting Menu Language SettingSetting LanguageAuto Keystone Auto setupInput search Display KeystoneBlue back Capture Logo Logo and Logo PIN code lock settingsLogo select Logo select CaptureLogo PIN code lock Logo PIN code lock Logo PIN code lock Dialog BoxRear Standby modeCeiling TerminalOn start Remote control PIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingEnter a PIN code Fan Fan controlLamp counter Factory defaultClosed Caption Factory default Then check the matters below Maintenance and CleaningIndicator emits a red light Projector is shut down and the WarningCleaning the Air Filter Attaching the Lens CoverCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Order Replacement Lamp Reset the lamp replacement counterLamp Handling Precautions Resetting the Lamp CounterTroubleshooting AppendixPower management function can not work while Freeze or No Show function is running. see pages 24Exclamation mark appears Remote Control does not workIndicator blinks or lights On the screen Top Control does not workInput PC AdjustMenu Tree SoundScreen Image Select Image AdjustSystem Image Select Setting Indicators and Projector Condition Indicators Projector ConditionCompatible Computer Specifications FreqTechnical Specifications Optional Parts Service Port Connector Terminal Mini DIN 8-PIN Configurations of TerminalsDimensions SerialLogo PIN Code Lock No PIN Code Number MemoKT7AC

PLC-XW65K specifications

The Sanyo PLC-XW65K is a high-performance LCD projector designed to meet the needs of both educational institutions and business environments. It offers exceptional image quality combined with advanced features that enable seamless presentations and dynamic visual content display.

At the heart of the PLC-XW65K is its remarkable brightness capability, boasting an impressive brightness rating of 6000 lumens. This feature allows for clear and vivid images, even in well-lit environments. Whether you are presenting in a classroom, conference room, or auditorium, the projector ensures that images remain sharp and easily viewable from various distances.

The PLC-XW65K utilizes a native XGA resolution of 1024 x 768, which facilitates crisp detail and accurate colors. Its 3LCD technology further enhances image quality by delivering balanced color reproduction and eliminating the "rainbow effect" often seen in DLP projectors. This makes the projector perfect for displaying a range of content, from detailed graphs and charts to vibrant visuals in multimedia presentations.

Connectivity is another key feature of the Sanyo PLC-XW65K. It comes equipped with multiple input options, including HDMI, VGA, and composite video inputs, ensuring compatibility with various devices, such as laptops, Blu-ray players, and document cameras. Additionally, it supports a variety of image formats, making it versatile for different usage scenarios.

One of the standout characteristics of the PLC-XW65K is its advanced lens technology. It features a powerful zoom function and a wide lens shift capability, allowing users to position the projector flexibly within a room. This ensures that installation is straightforward and that you can achieve the desired image size and position without distortion.

Also noteworthy is the Sanyo PLC-XW65K's built-in image adjustment features, including keystone correction and color management settings. These functionalities allow users to optimize the image to fit various screen sizes and environments effortlessly.

In terms of durability, the projector is constructed with high-quality materials designed for long-term use. It incorporates a highly efficient cooling system, which not only prevents overheating but also extends the lifespan of the lamp. The lamp life can reach up to 5,000 hours in eco mode, reducing the frequency of replacements and maintenance.

Overall, the Sanyo PLC-XW65K stands out as a reliable and efficient projector that provides superior image quality, advanced features, and robust performance, making it an excellent choice for professional presentations and educational settings.
Top Page Image Contents