Promethean 322 Panning Across a Live Image PAN, Playing a Slides Slide Show, Setting delay time

7.13 Panning Across a Live Image (PAN)

<Note> Panning and zooming are not available in Microscope Mode. From the remote control:

1.Press [PAN] on the remote control to zoom in a part of a live image.

2.Press [c] or [d] or [e] or [f] to move around the partially zoomed-in image.

3.Press [PAN] to exit the partially zoom in mode.

From the control panel:

1.Press [MENU] to enter the on-screen menu.

2.Press [f] or [e] to select the [Display] menu.

3.Press [d] to select [PAN].

4.Press [f] or [e] to select among [ON] modes.

5.Press [MENU] to exit.

6.Press [c] or [d] or [e] or [f] to move around the partially zoomed-in image.

7.14Playing a Slides (Slide Show)

7.14.1 Using the slide show effect:

1.Press [MENU] on the remote control or control panel to enter the on-screen menu.

2.Press [f] or [e] to select the [Storage] menu.

3.Press [d ] to enable [Slide Show Effect].

4.Press [f] or [e] to select page-flipping mode among [Off / Shutter / Right / Down / Side / Open].

5.Press [MENU] to exit.

7.14.2 Setting delay time

1.Press [MENU] on the remote control or control panel to enter the on-screen menu.

2.Press [f] or [e] to select the [Storage] menu.

3.Press [d] to enable [Delay].

4.Press [f] or [e] to select page-flipping interval [1 Sec/3 Sec/5 Sec/10 Sec/Manual].

5.Press [MENU] to exit.

English - 25