Promethean 322 Restoring Factory Default Settings Factory Reset, Computer- Related Functions

5.Press [f] or [e] to move the selected image left or right.

6.Press [ZOOM+/-] to zoom in/out from the live image

7.Press [PBP] to return to the stored image screen.

8.Press [MENU] to exit.

From the control panel

1.Press [MENU] to enter the on-screen menu.

2.Press [f] or [e] to select the [Display] menu.

3.Press [d] to select [PBP].

4.Press [PBP] to enter the photo selection screen.

5.Press [S] or [T] or [e] or [f] to select the desired file for comparison.

6.Press [ENTER] to activate image comparison.

7.Press [f] or [e] to move through selected images.

8.Press [ZOOM+/-] to zoom in/out from the live image

9.Press [PBP] to return to the stored image screen.

10.Press [MENU] to exit.

7.16Restoring Factory Default Settings (Factory Reset)

Use the remote control or control panel:

1.Press [MENU] on the remote control or control panel to enter the on-screen menu.

2.Press [f] or [e] to select the [Advance] menu.

3.Press [d] to select [Factory Reset].

4.Press [f] or [e] to select [Yes].

5.Press [ENTER] to activate.

7.17Computer- Related Functions

Ensure that the USB cable is connected and the drivers are installed before using the computer-related functions. Refer to 4.2.2 Connecting to external devices and 4.4 Installing the driver and application ActiView in Chapter 4 Installation and Connections in this user manual.

English - 27