Video Input
Sharpness
Press the Point ◄ button to soften the image and the Point ► button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point ◄► buttons to adjust the gamma value to obtain better balance of contrast. (From 0 to 15.)
Noise reduction
Noise interference on the screen can be reduced. Select one of the following to get smoother images.
Off . . disabled.
L1 . . lower reduction
L2 . . higher reduction
Progressive
Interlaced video signal can be displayed in a progressive picture. Select one of the following.
Off . . disabled.
L1 . . Select "L1" for an active picture.
L2 . . Select "L2" for a still picture.
Film . . Select "Film" for watching a film. With this function, the projector reproduces pictures faithful to the original film quality.
Reset
To reset the adjusted data, select Reset and press the SELECT button. The confirmation box appears and then select [Yes]. All adjustments returns to their previous figures.
Store
To store the adjusted data, select Store and press the SELECT button. Select a level from Image 1 to 4 with the Point ed buttons and press the SELECT button. A confirmation box appears and then select [Yes].
Stored data can be called up by selecting "Image" in the Image Level Selection on page 37.
Quit
Exit the Image Adjust Menu.
Note:
Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected. (p.36)
Store item
Image Level Menu
Move the red framed pointer to an image item to be set and then press the SELECT button.
The confirmation box appears and then select [Yes].
39