Sanyo 42LM5RTC, 42LM4RTC, 42LM4WPTC manual Installation, Loading The Touch Driver Software Onto Pc

Page 6

INSTALLATION

LOADING THE TOUCH DRIVER SOFTWARE ONTO PC

1. Switch on monitor

Do not plug the touchscreen interface cable into your computer.

2.Insert the ‘Information & Touch Software installation CD’ into the PC and follow the automatic installation instructions.

If the installation does not start automatically;

1.Click START on the Windows™ Taskbar; then click RUN.

2.Type d:\Autorun.exe where d is the letter of your CD-ROM drive. Click OK

3.Select the ‘Touch software’ button from the on-screen menu.

The software will create a subdirectory call TouchScreen on your PC in the ‘Program Files’ sub directory and copy all the relevant files necessary to run the touchscreen into it. Once completed, ‘launch the application’ will finish the installation. Please follow the instructions in the next section to complete the installation and the setting up of your touch screen.

For Windows Vista™ users; When the installation has finished and the dialogue box asks if you want to launch the application, un-tick the box. Instead, Select ‘Start’, ‘All Programs’, ‘Touchscreen’ and select Ma7_Control_En.exe to continue.

6

Image 6

Contents For serial Interface Interactive Touchscreen User Guide42LM4WPTC 42LM5WPTC 42LM4RTC 42LM5RTC Interactive Touchscreen User GuidePage TABLE OF CONTENTS CONTACT INFORMATION CARE AND CLEANING OF THE TOUCHSCREENABOUT THIS MANUAL SHIPPING DAMAGE/UNPACKINGINTRODUCTION COMPATIBILITYINSTALLATION LOADING THE TOUCH DRIVER SOFTWARE ONTO PCDo not plug the touchscreen interface cable into your computer CONFIGURING THE COMMUNICATIONS PORT STARTING THE DRIVER CONTROL PROGRAMReasons why the driver does not see the touchscreen are usually EXPLANATION OF THE STATUS SECTIONPage ADJUSTING THE TOUCH SENSITIVITY LEVEL Automatic SetupManual Sensitivity Setup Page CALIBRATION SETTING THE TOUCH OUTPUT TO SUIT THE APPLICATION PROGRAM To enable the touch function on the screen, tick the Enable check boxYou must now save the settings 1. Fig 8 Click on file 2. Click on save to save the current settingsWire Integrity Test DIAGNOSTICS AND FREQUENTLY ASKED QUESTIONSTesting the Hardware with ‘Graph’ Signal to Noise CheckMONITOR MODE USING EDGE ENHANCEMENT DELAYED STARTING OF THE DRIVER OUTPUTSLOW TOUCH SCREEN RESPONSE WHEN USING POWER HUNGRY APPLICATIONS FAULT FINDING GUIDEPROBLEMS WITH WINDOWS AUTOMATICALLY RUNNING THE DRIVER FROM START- UP DRIVER DOES NOT SEE THE TOUCHSCREENDRIVER PRIORITY CHANGE CHECK OR CHANGE THE VIRTUAL MEMORY SETTINGSTo set the priority settings permanently when the system restarts @echo off start /high c\program files\TouchScreen\MA7Driver.exe