Sanyo PCL-WXU10B, PCL-WXU10N, PCL-WXU10E Image Video Mode, EN-28, Anamorphic Video only, Freeze

Image (Video Mode)

Aspect

Use this function to choose your desired image size.

4 : 3	: Change the original aspect 1:1 to 4:3 at the composite video input
	or S-video input.
1 TO 1	: Keep the image with original width-height ratio at the component input.
FILL ALL	: The input source will be scaled to fit the projection screen.

ANAMORPHIC : Maintain the original aspect ratio in the center of the output image and place the majority of the distortion towards the horizontal edges of the image.

ANAMORPHIC (Video only)

1280 X 800

16:9

No matter what input signal is, out put aspect ratio is 16:9 and fit to the whole screen.

Freeze

Choose “ON” to freeze the screen image. Choose “OFF” to unfreeze the screen image.

EN-28