PRECAUTIONCONTENTS
If an abnormality does occur, turn the power switch off and unplug the unit. Have a qualified technician perform any repairs.
Do not use the monitor if it makes a strange noise, emits a strange odor, or if smoke comes out from it
If used under these conditions, the monitor may cause a fire or electric shock. Immediately unplug it and wait to make sure no more smoke comes from it. Then take it to the dealer for service. Do not try to repair or open the monitor yourself.
Do not allow the power cord to get damaged
•Do not place heavy objects on the power cord.
•Do not place the power cord near a heat source.
•Do not excessively bend the power cord, modify it, or secure it with staples.
Doing so may damage the power cord and cause a fire or electric shock.
If the power cord is damaged, take it to the dealer and have it replaced.
Do not allow dust or dirt to build up on the power cord or power outlet
A
Be especially careful when using the monitor in areas of high humidity, in areas with frequent condensation, in kitchens, and in places where there is excessive dust.
Periodically unplug the power cord and clean away the dust that builds up between the plug terminals.
Cautions when plugging in the power cord
•Make sure you insert the plug of the power cord all the way in the power outlet. Using the monitor with the power cord not fully plugged in may cause heat to generate and cause a fire.
•Do not use the monitor with the power cord wound or tied up. Heat may generate and cause a fire.
•When using an extension cord, be sure that the total current load of all equipment connected to it dose not exceed the specified ratings of the extension cord. If the rating are exceeded, heat may generate and cause a fire. Make sure to carefully read the specifications accompanying the extension cord.
Cleaning
•Dirt can be removed from the cabinet by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a soft detergent solution and wrung dry, then wipe dry with dry soft cloth.
•Do not use benzine, thinner or other chemical product on the cabinet, as that may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time, as that may cause damage or paint peeling.
SERVICE
This unit is a precision instruments and if treated with care, will provide years of satisfactory performance. However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre.
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . 4 CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . 6 BASIC OPERATION . . . . . . . . . . . . . . . . . . . 7 ADJUST THE OSD MENU ITEM . . . . . . . . . . 8 LANGUAGE SCREEN TABLE . . . . . . . . . . . 11 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . 13 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . 14
FEATURES
Equipped with video and audio input terminals
The video and audio input terminals (two systems for each input) allow bridge connections.
Equipped with Y/C input
This terminal is used to input Y/C separation signals
3