Sanyo VMC-8613 Basic Operation, Press the Power button to turn on the power, Sequence operation

Page 9

BASIC OPERATION

1 Press the POWER button to turn on the power.

ON: The power is turned on (the POWER indicator is lit). The signals from the channel (A, B or Y/C) which was being used when the power was last turned off will be input.

OFF: The power is turned off (the POWER indicator is off).

Note: If the power for the connected components is not turned on, or if a problem with operation has occurred, “VIDEO LOSS” will appear on the screen. If this happens, check the component concerned.

2 Select the audio and video input.

Use the monitor selector buttons (A or B) at the front of the monitor to select the picture being input to either the A or B terminals at the rear of the monitor.

If using the S-VIDEO input terminal at the rear of the monitor, press the monitor Y/C selector button.

Note: If there is no signal being input from the input terminals selected (A, B or Y/C) at the rear of the monitor, “NO SIGNAL” will be displayed.

3Select the desired menu item and then press the ENTER button.

If you press the ENTER button repeatedly while the menu screen is being displayed, the display will alternately change between the menu screen and the setting screen. At this time, the menu item will still be selected.

OSD

 

 

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal picture

3 Menu screen operations

1Press the OSD button.

The menu screen will be displayed.

The menu screen will only be displayed for about 13 seconds.

2Press the cursor (l) or (j) button.

The cursor will move up or down, so that you can select the desired menu item.

To return to the normal monitor screen

Press the OSD button once more, or

Select “EXIT: OSD” and then press the ENTER button.

Note: During this operation, “9. TITLE” and “10. VERSION” will be skipped and the screen will go straight to “EXT: OSD”.

SEQUENCE operation

For Model 8613 only

To set the monitor switching time (dwell time) setting, press the SEQUENCE button so that “SEQ” is displayed on the screen.

SEQUENCE

7

Image 9
Contents VMC-8618 VMC-8613 Sanyo Industrial Video Video Monitor Limited Warranty Information to User Explanation of graphical SymbolsImportant Safeguards Features PrecautioncontentsFront Panel Parts NamesAC Input socket Rear PanelRear a terminals AUDIO/VIDEO a terminals Rear B terminals AUDIO/VIDEO B terminalsBasic connections Connections to the S-VIDEO terminals ConnectionBasic Operation Press the Power button to turn on the powerSelect the audio and video input Menu screen operationsAdjust the OSD Menu Item Volume adjustment Monitor switching time dwell time settingMenu screen language setting Characters Table Language Screen Table Language Screen Table Power on TroubleshootingSpecifications DimensionsMini DIN 4 pin terminal specification