Getting Started, Battery Installation | VTech 91-002364-001-000

NOTE: Please keep User’s Manual as it contains important information.

Unlock the packaging locks:

Rotate the packaging lock 90 degrees counterclockwise.

Pull out the packaging lock.

GETTING STARTED

BATTERY INSTALLATION

1.Make sure the unit is turned OFF.

2. Locate the battery cover on the bottom of the unit. Use a coin or screwdriver to loosen the screw.

3. Install 3 new “AA” size (AM-3/LR6) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.)

4.Replace the battery cover and tighten the screw to secure the battery cover.

BATTERY NOTICE

•Install batteries correctly observing the polarity (+, -) signs to avoid leakage.

•Do not mix old and new batteries.

•Do not mix batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Remove the batteries from the equipment when the unit will not be used for an extended period of time.