Sanyo PLC-WXU700 owner manual Computer Input Computer System Selection, PC System Menu, Auto Mode

Page 32

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, UXGA or WUXGA with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 76-77)

One of the following messages may appear when:

Auto

-----

Mode 1

The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.34-35).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on pp.69-72.)

The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5(pp.34-35).

PC System Menu

The PC System Menu Selected system is displayed.

SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point ▲▼ buttons to select Input and

 

then press the Point or the SELECT button.

2

Use the Point ▲▼ buttons to select Systerm and then

 

press the Point or the SELECT button.

3

Use the Point ▲▼ buttons to select the desired system

 

and then press the SELECT button.

Customized Mode (1–5)set in the PC adjust Menu

PC System Menu (pp.34-35).

RGB(Computer 1)

Systems in this dialog box can be selected.

32

Image 32
Contents Network Supported Memory ViewerFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Moving the ProjectorPositioning Precautions Bottom Front Downward Upward UsualCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Part Names and Functions BottomPart Names and Functions ② USB Connector Series B⑦ LAN Connection Terminal ⑧ USB Connector Series a ② Point Volume +/- buttons ④ Auto SETUP/CANCEL button⑤ Power indicator ⑥ Warning indicator ⑩ Lamp Replace indicatorPart Names and Functions Remote Control NoteRemote Control Operating Range Remote Control CodePart Names and Functions Laser Pointer Function Pointer FunctionSpotlight PointerPart Names and Functions Wireless Mouse Operation Adjustable FeetButton Click buttonInstallation Positioning the ProjectorInstallation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord Projector side AC outlet sideFor Continental Europe For the U..K For the U..S..A.. and CanadaInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlBasic Operation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector Basic Operation How to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuBasic Operation Menu Bar Keystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No Show buttonImage button Screen buttonComputer Input Input MenuInput button Computer Computer 2  Computer Input Input Source Selection Computer 2 RGBInput Menu Auto Mode Computer Input Computer System SelectionPC System Menu PC System Menu pp.34-35Computer Input Auto PC adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC adjustment Reset Mode freeComputer Input StoreComputer Input Image Mode Selection Image Select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuNormal TrueCustom Position H/VFor zooming in and out the images Digital zoom + Digital zoomVideo Input Input Source Selection Video, S-videoVideo Video buttonComponent RGB ScartHdmi button Computer buttonVideo Input Video System Selection Video or S-videoAV System Menu Video or S-video ComponentCinema Video Input Image Mode SelectionDynamic Image Select Menu Video Input Image Adjustment ColorTint Blackboard or ColorboardOff Disabled Lower reduction Higher reduction Progressive Video InputStore Menu Noise reductionVideo Input Screen Size Adjustment ZoomWide Natural wideSetting SettingSetting Menu LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.23 KeystoneBackground DisplayDefault Capture Logo PIN code lockCapture Logo PIN code lockChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Logo PIN code changeHdmi setup Standby mode Large , Middle or Small , Arrow , Finger or Dot and pressSwitching of the Input Source Picture in PictureSelecting the Main picture or Sub picture Operation of the Sub picturePower management On start Closed captionRemote control To change the code for the remote controlLamp control To change the code for the projectorKey lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeEnter a PIN code PIN code changeFan Control Setting FanFan control Lamp counterFactory default Factory defaultFilter counter Filter counterInformation Input Source Information DisplayMaintenance and Cleaning Indicator is blinking redProjector is shut down and the Warning indicator lights red Projector is shut down and the WarningFilter counter Reset? Maintenance and Cleaning Cleaning the FiltersResetting the Filter Counter Cleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Maintenance and Cleaning Lamp Replacement Service Parts No. 333Reset the lamp counter Lamp Replace indicatorMaintenance and Cleaning Resetting the Lamp Counter Lamp counter Reset?Troubleshooting AppendixAppendix Remote Control does not work Indicator blinks or lightsWireless Mouse function does not work Image is distorted or runs offAppendix Appendix Menu Tree Information System AutoSettingImage Adjust Screen Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionSXGA1 Appendix List of Picture in Picture Appendix Technical Specifications Optional Parts Appendix PJ Link Notice Hdmi 19 Pin Type a Appendix Configurations of TerminalsUSB Connector Series B Appendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No USB Thumb Drive CaseAppendix Dimensions KY7AC

PLC-WXU700 specifications

The Sanyo PLC-WXU700 is a versatile and powerful projector designed to meet the demands of educational and corporate environments. As a high-performance device, it offers a blend of advanced features and technologies, making it suitable for various presentations, meetings, and classroom settings.

One of the main features of the PLC-WXU700 is its exceptional brightness, boasting an impressive 7000 lumens output. This enables the projector to deliver clear and vibrant images, even in well-lit rooms. Whether you are showcasing detailed presentations, video content, or intricate graphics, the high brightness ensures that your visuals remain sharp and easily viewable for all audiences.

The projector also supports WXGA resolution (1280 x 800 pixels), providing a clear and detailed image that enhances the viewing experience. The 16:10 aspect ratio is particularly beneficial for displaying widescreen content, making it a suitable choice for multimedia presentations. The PLC-WXU700 comes equipped with a high contrast ratio that helps in producing rich and vibrant colors, ensuring that images and videos appear lifelike and engaging.

Another significant aspect of the Sanyo PLC-WXU700 is its advanced lens technology, including a powerful zoom feature. The 1.6x optical zoom allows users to adjust the image size without sacrificing quality, making it easier to fit large images into various screen sizes or distances. This flexibility is invaluable in different room configurations, enabling seamless presentation setups.

Connectivity is another area where the PLC-WXU700 excels. It is equipped with multiple input options, including HDMI, VGA, and composite video connections. This variety allows users to connect various devices, such as laptops, DVD players, and document cameras, ensuring compatibility with a wide range of hardware.

The projector's durability and reliability are enhanced with features like a long-lasting lamp life, rated at up to 4000 hours in normal mode. This extends the time between lamp replacements, reducing maintenance costs and downtime. Additionally, its lightweight and compact design make it easy to transport between locations, ideal for professionals on the go.

In terms of user-friendliness, the PLC-WXU700 incorporates intuitive controls and an easy-to-navigate menu system, allowing users to quickly adjust settings and configurations according to their needs. This design focus ensures that both novice and experienced users can operate the projector with ease.

Overall, the Sanyo PLC-WXU700 stands out as a robust and reliable projector, with high brightness, excellent resolution, versatile connectivity, and user-friendly features. It is an ideal solution for anyone seeking top-notch presentation technology for educational and professional use.