Sanyo PLC-ET30L owner manual Change the PIN code, Change the PIN code, Test pattern, Lamp counter

Setting

Change the PIN code

The PIN code can be changed to your desired four-digit number. Press the Point d buttons to select “PIN code change” and press the SELECT button. The New PIN code input dialog box appears. Set a new PIN code.

Test pattern

Various test pattern are available for use when setting up the projector.

Warning log

This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning logs are displayed with the latest warning message at the top of the list, followed by previous warning messages in chronological order.

✔Note:

•When the Factory default function is executed, all the warning log records will be deleted.

Lamp counter

This function is used to reset the lamp counter.

When the lamp life is left less than 100 hours, the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching.

When replacing the projection lamp, reset the lamp counter. See page 60 for operation.

Change the PIN code

caution:

when you have changed THE PIn code, write down the new pin code in column of the pin code no.. memo on page 76, and keep it securely.. If you forget your PIN code,the projector can no longer be started..

This icon appears on the screen when the end of lamp life is approaching.

56