Sanyo PDG-DWL100 Eco Standby Power 1W, Remote Control, Closed Caption, Power Management, Sound

User Controls

Note

Please turn this func- tion “Off ”, if you want to turn on “Power” by network during standby mode.

Note

Eco Standby Power (<1W)

This function is available when the projector is turned off and in Stand-by. It is recommended to use Eco under normal condition.

On:condition.lower power consumption than Normal mode in Stand-by

Off: normal power consumption in Stand-by condition.

Remote Control

This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in “Code 2”, both the projector and the remote control must be switched to “Code 2”.

■To change the code for the projector:

Select either “Code 1” or “Code 2” in this Setting Menu.

■To change the code for the remote control:

Press and hold both the MENU and IMAGE buttons together for 10 seconds or more. After changing the code, make sure the remote control operates properly.

Closed Caption

After keystone adjustment, maybe need to re-adjust screen again during display the closed caption.

This function is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Use the or to select Off, CC1, CC2.

Power Management

Set the interval of power-off of the system, if there is no signal input. (minutes/unit)

Sound

Mute:

■Choose “On” to mute the volume.

■Choose “Off” to restore the volume.

28

English