Sanyo PDG-DWL100 owner manual Click Use the following IP address, and type in as below

For example: Use Microsoft Internet Explorer (IE) web browser to control the projector, the IP address is http: // 192.168.0.100.

Step 1: Find an IP Address (192.168.0.250) from LAN function of projector.

Step 2: Select apply and press “ENTER” button to submit function or press “MENU” key to exit.

Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks

,click Change settings of this connection.

Step 4: On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click “Properties.”

Step 5: Click Use the following IP address, and type in as below:

1)IP address: 192.168.0.250

2)Subnet mask: 255.255.255.0

3)Default gateway: 168.0.254.192

User Controls

Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click “LAN Settings...”

Step 7: The Local Area Network (LAN) Setting dialog box appears, In the Proxy Server area, cancel the

Use a proxy server for your LAN check box., then click “OK” button

twice.

Step 8: Open your IE and type in the IP address of 192.168.0.250 in the URL then press “ENTER” key. It has entered LOGIN mode as below:

1)User name: user / Password: user

2)User name: administrator /

Password: admin

e
Not	Only administrator could enter the
	Network setting and alert setting.

33

English

English