Hitachi PJ-LC9 user manual Start UP

Page 44

Multifunctional settings

SCREEN menu (continued)

Item

Description

 

Using the buttons ▲/▼ switches the mode for the start up screen.

 

The start up screen is a screen displayed when no signal or an

 

unsuitable signal is detected.

 

MyScreen ORIGINAL TURN OFF

 

MyScreen is a screen you can register as a desired screen. The

START UP

ORIGINAL screen is the existing standard screen. When the TURN

 

OFF is selected, the BLACK screen is used.

 

• To avoid remaining as an afterimage, the MyScreen and the

 

ORIGINAL screens will change to the BLANK screen after several

 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, it

 

will change to the BLACK screen.

 

• For the MyScreen, please refer to the item MyScreen below. About the

 

BLACK and BLANK screens, please refer to the item BLANK. (41)

 

This item functions for capturing the MyScreen of the blank screen

 

and the start up screen. Please execute displaying the input

 

including the picture you want to capture.

1. Choosing this item displays a dialog titled “MyScreen”.

It will ask you if you start capturing the

MyScreen

 

picture from the current screen. Please

Do you start capturing this picture?

 

 

wait for the target picture to be displayed.

ESC , + :NO

ENTER , :YES

 

 

2.Press the ENTER button when the picture is display. The picture will freeze and the frame for

capturing appears. To restore the screen and return to the previous dialog, press the RESET or ESC button.

 

3. Using the buttons ◄/►/▲/▼adjusts

 

MyScreen

the frame position.

MyScreen

Move the capture area

 

Please move the frame to the position of

as you want.

 

ESC , + :RETURN ENTER , :NEXT

 

the picture which you want to use.

 

 

 

Although the adjustable range will vary depending on inputs, and

 

the frame may not move for some signals. To restore the screen

 

and return to the previous dialog, press the RESET or ESC

 

button.

My Screen

 

4. To start registration, press the ENTER

45%

 

button.

 

Registration takes several minutes. When the registration is completed, the registered screen and the message “MyScreen registration is finished.” are displayed for several seconds. If the registration failed, the message “A capturing error has occurred. Please try again.” is displayed.

42

Image 44
Contents Projector User’s Manual Operating GuideManuel dutilisation Guide dutilisation Bedienungsanleitung BenutzerhandbuchEspañol Manual de usuario Adicional Français Manuel dutilisation SupplémentaireDeutsch Bedienungsanleitung Zusätzlicher Thank you for purchasing this projector Trademark acknowledgmentPower on/off Turning on the power Turning off the powerBefore use PreparationsMultifunctional settings MaintenanceTroubleshooting Warranty and after-service SpecificationsProjector features About this manualAbout contents of package Part names ProjectorMagnify Remote controlControl buttons Fastening the lens cover Projector Bottom sideStrap Strap ringAbout the filter cover bottom-up use TabsWhen put on a table When suspended from the ceiling ArrangementFor 169 screens For 43 screensScreen size Projection distance Screen height Inch 120Adjusting the projector’s elevator Elevator feet Elevator buttonConnecting your devices Examples of connection with a VCR/DVD playerExamples of connection with a computer Example of computer signal About Plug-and-Play capabilityVesa Text VesaConnecting power supply Power switch AC inletLoading batteries into the remote control Using the remote control STANDBY/ON Turning on the powerButton Power switch Turning off the power Adjusting the volume Temporarily muting the soundSelecting an input signal Searching an input signalSelecting an aspect ratio For a 169 signalFor a 43 signal Using the automatic adjustment feature Adjusting the zoom magnifying powerAdjusting the focus Adjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen To choose the target menu Using the menu functionTo display a menu Enter Setup MenuTo choose the target item To reset To operateTo return to the previous menu To close the menuAspect ZoomKeystone ModeReset SharpnessWhisper Mirror#1 Default  #1 Custom  #2 Default #3 Custom  #3 Default  #2 CustomPicture menu GammaColor Temp High  MiddleCustom  LOW TV  Film  Turn OFF ProgressiveLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1For a 169 signal For a 43 signalFor an RGB signal Image menuPhase Over ScanPosition SizeAuto Adjust Execute For a video signal or s-video signalInput menu Color SpaceAuto  Ntsc  PAL  Secam Turn on  Turn OFFSetup menu VolumeNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTScreen menu Menu PositionOSD Bright Bright  DarkStart UP MyScreen Lock MessageNo Input is Detected Sync is OUT of RangeReset  Cancel Option menuRGB  S-VIDEO  Video Auto OFFService Auto AdjustEnable  Disable FAN SpeedFilter Message Factory ResetGhost Lamp Case of replacement by yourself Type number = DT00707Center point of claws Tabs Air filter Type number = NJ22642Usual filter cover Filter cover for bottom-up usePush mark Usual filter coverCaring for the lens Caring for the cabinet and remote controlInside of the projector There is no input signal Internal portion temperature is risingHorizontal or vertical wavelength of the input signal Related messagesRegarding the indicator lamps Indicator Cooling fan is not operating It is time to clean the air filterThere is a possibility that the interior portion Has become heatedPhenomena that may easily be taken as machine defects If the situation cannot be correctedVolume is adjusted to an extremely low level Brightness is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableSpecification RGB inputCommunication port Video inputDimension diagram Unit mmHitachi Home & Life Solutions, Inc. Middle East Office Digital Media DivHitachi Europe GmbH Munich Office Hitachi Europe S.r.l
Related manuals
Manual 62 pages 31.2 Kb

PJ-LC9 specifications

The Hitachi PJ-LC9 is a compact and versatile projector, renowned for its cutting-edge features and outstanding performance. Ideal for business presentations, educational settings, and home theater use, it blends functionality with user-friendly design. With its impressive specifications, the PJ-LC9 caters to the demands of professionals and casual users alike.

One of the key features of the PJ-LC9 is its native resolution of 1024 x 768 pixels (XGA), which ensures crisp and clear images. This resolution is particularly beneficial for presentations containing detailed graphs, charts, and high-quality images. The projector’s brightness of 2500 ANSI lumens makes it suitable for use in a variety of lighting conditions, allowing it to shine in both dim and well-lit environments.

The PJ-LC9 employs advanced LCD technology, which enhances color accuracy and contrast, providing vibrant and lifelike visuals. This technology aids in delivering sharp and vivid images, which is crucial for capturing and maintaining the audience's attention during presentations or watching media content.

Another standout characteristic of the PJ-LC9 is its lightweight design, weighing just 2.5 kg, which makes it highly portable. Its compact form factor allows users to effortlessly transport it between locations, making it an excellent choice for traveling professionals and educators who need to present on-the-go.

Connectivity options are another advantage of the Hitachi PJ-LC9. It comes equipped with multiple input ports, including HDMI, VGA, and USB, enabling users to connect various devices such as laptops, desktops, and media players without hassle. The inclusion of RS-232C serial connection also makes it compatible with computer control for automation and control purposes.

Additionally, the projector features a built-in 1W speaker, providing adequate sound output for small spaces, although external speakers may still be preferable for larger venues. The PJ-LC9 also supports a range of aspect ratios, including 4:3 and 16:9, allowing for flexibility depending on the content being presented.

In terms of maintenance, the PJ-LC9 utilizes a long-lasting lamp that can deliver up to 3000 hours of operation in standard mode, extending to around 5000 hours in eco mode. This longevity ensures reduced maintenance costs and downtime for users.

In summary, the Hitachi PJ-LC9 is a reliable, feature-rich projector that excels in performance and versatility. Its combination of high resolution, brightness, portability, and connectivity options make it a popular choice for professionals and educators seeking an efficient and effective projection solution.