Hitachi CP-X327W, CP-S317W user manual Option Menu, Auto OFF, Whisper

Page 38

MULTIFUNCTIONAL SETTINGS (continued)

OPTION Menu

With the OPTION menu, the five items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN

VOLUME

PICTURE-1

AUTO OFF

PICTURE-2

WHISPER

INPUT

LAMP TIME

SCREEN

FILTER TIME

OPTION

 

12

: SELECT

Example : OPTION Menu

(VOLUME)

OPTION Menu

Item

 

 

Description

 

 

 

 

 

VOLUME

Adjust Volume: High

Low

 

 

 

 

 

 

Adjust AUTO OFF Time:

 

 

AUTO OFF

Long (MAX. 99 min.)

 

Short (Min. 1 min.)

(DISABLE: 0 min.)

The system automatically enters the standby mode if no signal is received

 

 

within the set time. This function is inactive when DISABLE (0 min.) is selected.

 

 

 

 

 

Select WHISPER Mode:

 

 

WHISPER

NORMAL

WHISPER

 

When WHISPER is selected the WHISPER mode is activated. In the WHISPER

 

 

mode, acoustic noise and screen brightness are reduced.

 

 

 

 

Refer to LAMP TIME: When set, this function displays the total time the

 

projector lamp has been used since new.

 

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a

LAMP TIME new lamp, select RESET on the menu with the button.

•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.

•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select

FILTER TIME RESET on the menu with the button.

DEFAULT CANCEL

•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.

•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

6

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Brukerhåndbok Vol.1 Grunnleggende CP-S317W/CP-X327WManuale Distruzioni Vol.1 Informazioni di base Contents Soft carrying case Remote control Projector FeaturesPower cord US Type UK Type Europe Type Projector With Lens CapPower cord Only use the power cord that came with the projectorDevices you will be using to the projector Part Names ReferenceVideo button 15 Aspect button Magnify buttons Auto button Blank button Volume button Mute buttonRGB button Search button STANDBY/ON button Freeze button Keyboard buttonsSetting UP the Projector Adjusting the Projectors Elevator FeetTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerConnecting to a DVD Player Connecting to a VCRConnecting to a Display Monitor Operating the remote control Using the Remote ControlPutting batteries into the remote control unit Turning on the Power Selecting an Input Signal Turning OFF the Power Press Buttons to adjust Volume Adjusting the VolumePress the Volume button Temporarily Muting the SoundPress the Position button Adjusting the PositionUse Buttons to adjust Position Automatic Adjustment for Video Input Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Press the Auto buttonAs illustrated on the right, a dialog will appear Correcting Keystone DistortionsPress the Keystone button On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenTemporarily Blanking the Screen Signal SearchingSelecting the Aspect Ratio Select an item using Buttons, then press Or Enter button Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Press Buttons to adjust the levelAvailable Functions Remote Control Operation Operating the PC ScreenDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp AIR Filter Caring for the air filterReplacing the air filter Caring for the inside of the projector Caring for the cabinet and remote control transmitterOther Care Caring for the lensRegulatory Notices Bedienungsanleitung Teil 2 Fortsetzung For Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu PICTURE1 Menu Picture 1 MenuPicture 2 Menu PICTURE2 MenuAuto Input MenuInput Menu VideoBlank Screen MenuScreen Menu Auto OFF Option MenuOption Menu WhisperRelated Messages Regarding the Indicator Lamps Power Lamp TempVol.2-3 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-6Specification SpecificationsDimension Diagram Unit mmWarranty and AFTER-SERVICE Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France

CP-X327, CP-S317, CP-S317W, CP-X327W specifications

The Hitachi CP-X327W and CP-S317W projectors, along with their counterparts CP-S317 and CP-X327, represent a blend of advanced projection technologies and user-friendly features designed to enhance presentations across various environments.

The CP-X327W is notable for its WXGA resolution (1280 x 800 pixels), making it ideal for high-definition presentations. This model boasts a brightness level of 3,200 ANSI lumens, ensuring bright and vivid images even in well-lit rooms. Its 2,500:1 contrast ratio adds depth to images, making text sharp and graphics pop. The projector features 3LCD technology, which provides accurate color reproduction and reduces rainbow effects often seen in single-chip projectors.

Equally impressive, the CP-S317W stands out with its XGA resolution (1024 x 768 pixels) and a brightness of 3,000 ANSI lumens. Its lightweight and compact design makes it suitable for portability, appealing to users who frequently present on the go. The 2,000:1 contrast ratio enhances visual clarity, making it a solid choice for educational and business settings.

Both models incorporate Hitachi's advanced image-processing technology, which aids in scaling images without significant loss of quality. This feature is particularly beneficial when projecting content from a variety of device sources, from laptops to tablets. The ability to easily connect via multiple ports, including HDMI, VGA, and USB, adds versatility, allowing users to switch between devices seamlessly.

One standout characteristic across these projectors is their energy-efficient operation. With a lamp life expectancy of up to 6,000 hours in eco-mode, maintenance is minimized, which is especially valuable for schools and organizations that aim to lower operational costs.

In terms of usability, both the CP-X327W and CP-S317W feature intuitive menu systems, remote controls, and easy-to-navigate settings, allowing users of all skill levels to operate them with confidence. Furthermore, they include built-in speakers for basic audio needs, although external sound systems are recommended for larger venues.

In summary, the Hitachi CP-X327W, CP-X327, CP-S317W, and CP-S317 projectors exemplify quality and reliability. Their robust features, advanced technologies, and user-centric designs make them suitable options for a variety of professional settings, ranging from classrooms to corporate boardrooms, ensuring effective and impactful presentations.
Top Page Image Contents