Hitachi CP-S317W, CP-X327W user manual Related Messages

Page 39

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

 

 

Message

 

 

 

Description

 

 

 

 

 

CHANGE THE LAMP

 

Lamp usage time is approaching 2,000 hours. (Note 2)

 

AFTER REPLACING LAMP,

 

Preparation of a new lamp, and an early lamp change, is

 

RESET THE LAMP TIMER.

 

recommended. After you have changed the lamp, please be

 

 

 

(Note 1)

sure to reset the lamp timer.

 

 

 

 

 

 

 

CHANGE THE LAMP

 

Lamp usage time is approaching 2,000 hours. A lamp change

 

 

within

hours is recommended. (Note 2)

 

AFTER REPLACING LAMP,

 

 

 

When lamp usage reaches 2,000 hours, the power will

 

RESET THE LAMP TIMER.

 

 

 

automatically be turned OFF. Please change the lamp by

THE POWER WILL TURN OFF

referring to “THE LAMP” in Vol.1 (Basic). After you have

 

AFTER

hr.

 

changed the lamp, please be sure to reset the lamp

 

 

 

(Note 1)

timer.

 

 

 

 

 

 

 

 

CHANGE THE LAMP

 

As lamp use has reached 2,000 hours, the power will soon be

 

 

automatically turned OFF. (Note 2)

 

AFTER REPLACING LAMP,

 

Please immediately turn the power OFF, and follow the

 

RESET THE LAMP TIMER.

 

instructions in the “THE LAMP” section of the separate booklet,

THE POWER WILL TURN OFF

Vol.1 (Basic).

After you have changed the lamp, please be sure to reset the

 

 

AFTER 0 hr.

 

 

 

 

 

 

lamp timer.

 

 

 

 

 

 

CLEAN THE AIR FILTER

 

A note of precaution when cleaning the air filter.

 

AFTER CLEANING AIR FILTER,

After cleaning the filter, operate FILTER TIME of the OPTION

 

RESET THE FILTER TIMER.

 

Menu, and perform reset of the filter timer.

 

 

 

 

 

 

 

NO INPUT IS DETECTED

 

There is no input signal.

 

 

Please confirm the signal input connection, and the status of the

 

 

ON

 

 

 

 

 

 

signal source.

 

 

 

 

 

 

 

 

 

 

 

 

SYNC IS OUT OF RANGE

 

The horizontal or vertical wavelength of the inputted signal is

 

 

outside of the response parameters of this unit. Please confirm

ON

fH

kHz

fV

Hz

the specs for this unit or the signal source specs.

 

 

 

 

 

 

 

 

 

 

 

The internal portion temperature is rising. Please turn the power

 

 

 

 

 

OFF, and allow the unit to cool down for approximately 20

 

 

 

 

 

minutes. After having confirmed the following items, then please

 

CHECK THE AIR FLOW

 

resent the power to ON.

 

 

 

 

 

• Is there blockage of the air passage aperture?

 

 

 

 

 

• Is the air filter dirty?

 

 

 

 

 

• Does the peripheral temperature exceed 35°C?

 

 

 

 

 

 

 

NOTES

Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be reappeared every time the power is turned ON.

Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped with an automatic shut-down function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this unit.

ENGLISH

7

Image 39
Contents CP-S317W/CP-X327W Manuale Distruzioni Vol.1 Informazioni di baseBrukerhåndbok Vol.1 Grunnleggende Contents US Type UK Type Europe Type Projector With Lens Cap Projector FeaturesPower cord Soft carrying case Remote controlOnly use the power cord that came with the projector Devices you will be using to the projectorPower cord Reference Part NamesFreeze button Keyboard buttons Auto button Blank button Volume button Mute buttonRGB button Search button STANDBY/ON button Video button 15 Aspect button Magnify buttonsAdjusting the Projectors Elevator Feet Setting UP the ProjectorAdjusting the Screen Size and Projection Distance ScreenTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Temporarily Muting the Sound Adjusting the VolumePress the Volume button Press Buttons to adjust VolumeAdjusting the Position Use Buttons to adjust PositionPress the Position button Press the Auto button Using the Automatic Adjustment FeatureAutomatic Adjustment for RGB Input Automatic Adjustment for Video InputOn the screen to aid you in correcting the distortion Correcting Keystone DistortionsPress the Keystone button As illustrated on the right, a dialog will appearFreezing the Screen Using the Magnify FeatureSignal Searching Selecting the Aspect RatioTemporarily Blanking the Screen Press Buttons to adjust the level Using the Menu FunctionsSelect a menu using Buttons Then press Or Enter button Select an item using Buttons, then press Or Enter buttonOperating the PC Screen Available Functions Remote Control OperationHigh Voltage High Temperature High Pressure LampDo not use the projector with the lamp cover removed Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Caring for the lens Caring for the cabinet and remote control transmitterOther Care Caring for the inside of the projectorRegulatory Notices Bedienungsanleitung Teil 2 Fortsetzung For Technical see the end of this manual Multifunctional Settings Main MenuMain Menu PICTURE2 Menu Picture 1 MenuPicture 2 Menu PICTURE1 MenuVideo Input MenuInput Menu AutoScreen Menu Screen MenuBlank Whisper Option MenuOption Menu Auto OFFRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-6 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-2 Vol.2-3Unit mm SpecificationsDimension Diagram SpecificationWarranty and AFTER-SERVICE Hitachi France Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi Business Systems Nordic

CP-X327, CP-S317, CP-S317W, CP-X327W specifications

The Hitachi CP-X327W and CP-S317W projectors, along with their counterparts CP-S317 and CP-X327, represent a blend of advanced projection technologies and user-friendly features designed to enhance presentations across various environments.

The CP-X327W is notable for its WXGA resolution (1280 x 800 pixels), making it ideal for high-definition presentations. This model boasts a brightness level of 3,200 ANSI lumens, ensuring bright and vivid images even in well-lit rooms. Its 2,500:1 contrast ratio adds depth to images, making text sharp and graphics pop. The projector features 3LCD technology, which provides accurate color reproduction and reduces rainbow effects often seen in single-chip projectors.

Equally impressive, the CP-S317W stands out with its XGA resolution (1024 x 768 pixels) and a brightness of 3,000 ANSI lumens. Its lightweight and compact design makes it suitable for portability, appealing to users who frequently present on the go. The 2,000:1 contrast ratio enhances visual clarity, making it a solid choice for educational and business settings.

Both models incorporate Hitachi's advanced image-processing technology, which aids in scaling images without significant loss of quality. This feature is particularly beneficial when projecting content from a variety of device sources, from laptops to tablets. The ability to easily connect via multiple ports, including HDMI, VGA, and USB, adds versatility, allowing users to switch between devices seamlessly.

One standout characteristic across these projectors is their energy-efficient operation. With a lamp life expectancy of up to 6,000 hours in eco-mode, maintenance is minimized, which is especially valuable for schools and organizations that aim to lower operational costs.

In terms of usability, both the CP-X327W and CP-S317W feature intuitive menu systems, remote controls, and easy-to-navigate settings, allowing users of all skill levels to operate them with confidence. Furthermore, they include built-in speakers for basic audio needs, although external sound systems are recommended for larger venues.

In summary, the Hitachi CP-X327W, CP-X327, CP-S317W, and CP-S317 projectors exemplify quality and reliability. Their robust features, advanced technologies, and user-centric designs make them suitable options for a variety of professional settings, ranging from classrooms to corporate boardrooms, ensuring effective and impactful presentations.