Hitachi CP-S220W user manual Operations, Basic Operation Description

OPERATIONS (continued)

Basic Operation

Basic manipulation to show in the table 1-2 can be done easily by the control panel of projector and the attached remote controller. (The item of ⊕ can manipulate with the control panel.)

Use the remote control in front of the remote control photoreceptor at a distance of about 3 m or less and an angle of 30 degrees to the left or right of the center.Be careful of the strong light and the obstacle because it sometimes obstructs remote controller manipulation.

Table 1-2. Basic Operation

Item Description

Sequential switching of the input signal : Push INPUT button.⊕

RGB → VIDEO → S-VIDEO (→ RGB)

The selection of input of RGB : Push RGB button.

INPUT	VIDEO/S-VIDEO → RGB
SELECT	The selection of input of VIDEO/S-VIDEO : Push VIDEO button.
	RGB → VIDEO/S-VIDEO	S-VIDEO ↔ VIDEO
	*The signal name chosen at the time of a change in an input signal is
	displayed for about three seconds.
	A setting/release of the centering control mode : Push POSITION button.
	Icon [ ] is displayed by the centering control mode.
	The accommodation of the image location : Push , , , button
	by the centering control mode.
POSITION	* It is effective by the VIDEO/S-VIDEO input only at the time of the
	expansion mode.

*Icon [] disappears, and centering control mode is canceled automatically when it passes for about 10 seconds under the condition that manipulation isn't done.

	The format of the menu item : Choose an appropriate item and push
RESET ⊕	RESET	button.
	The format of the centering control : Push RESET			button by the
	centering control mode.
	The setting of the magnify mode : Push MAGNIFY			button.
	The movement of the magnify region : Do "centering control" by the
	magnify mode.
MAGNIFY	The accommodation of the magnify multiplying factor : Push
	MAGNIFY	/	by the magnifyn mode.

A release of the magnify mode : Push MAGNIFY OFF button.

*Expansion is canceled due to the execution/setting of "AUTO" "ASPECT" "VIDEO" or the change in the input signal.

	A setting/release of the FREEZ mode : Push FREEZE button.
	It is displayed, and an image rests by the rest mode icon [II].
FREEZE	* Rest is canceled due to the execution/setting of "centering control"
	"sound volume" "noise reduction" "AUTO" "BLANK ON/OFF" or "MENU
	ON/OFF", the change in the input signal.
	* Be careful not to forget a release the static image when it rests.

ENGLISH

1-9