Hitachi CP-SX5600W user manual Operations, Power on, Power OFF, Equipment is used safely

Page 10

OPERATIONS

STANDBY/ON Button

STANDBY/

STANDBY/ON

BLANK

(STANDBY/ON Indicator)

 

LASER

ON Button

 

 

VIDEO

RGB

 

 

 

 

AUTO

 

Power Switch

 

MENU

KEYSTONE

 

 

 

 

 

MENU SELECT

 

Zoom Knob

POSITION

RESET

 

FREEZE

PinP

 

 

 

Focus Ring

MAGNIFY

MUTE

 

OFF

 

Lens cap

VOLUME

ENGLISH

Power ON

1.Check that the power cord is connected correctly.

2.Set the power switch to [ ]. The standby mode is selected, and the STANDBY/ON indicator is turned to orange.

3.Press the STANDBY/ON button on the control panel or the remote control transmitter. Warm-up begins and the STANDBY/ON indicator blinks in green.

4.The STANDBY/ON indicator ceases blinking and turns to green when power is on. Remove the lens cap.

5.Adjust picture size using the Zoom Knob.

6.Adjust focus using the Focus Ring .

Power OFF

1.Press the STANDBY/ON button on the control panel or the remote controller. Then,the message "Power off?" will appear on the screen, and the message will disappear by any operation or no operation for

5 seconds. During this message indication, press the STANDBY/ON button again. The projector lamp is extinguished and lamp cooling begins. The STANDBY/ON indicator blinks orange during lamp cooling.

Pressing the STANDBY/ON button has no effect while the STANDBY/ON indicator is blinking.

2.The system assumes the Standby mode when cooling is complete, and the STANDBY/ON indicator ceases blinking and changes to orange. Check that the indicator is orange and set the Power switch to [O].

3.The STANDBY/ON indicator is extinguished when power is off. Attach the lens cap.

Put the Lens cap to the lens properly. In order to do it, keep pushing two knobs on the lens cap, then fit it to the lens holding the cap in horizontal position.

WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that

the equipment is used safely.

NOTE Except in emergencies, follow the above-mentioned procedure for turning power off. If the projector is used improperly, it may very difficult to turn off the projector caused by heating inside the unit. And the reduction of life time of lamp and LCD panels will be caused by incorrect procedure.

To prevent any trouble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before the projector.

When a projector continues projecting the same image, the image may remain as an afterimage. Please do not project the image same for a long time.

ENGLISH-9

Image 10
Contents CP-SX5600W Contents Contents of package FeaturesBefore USE Before USE Part NamesENGLISH-4 Loading the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Example of System Setup Power ConnectionPlug & Play Operations Power onPower OFF Equipment is used safelyBasic Operation OperationsBasic Operation Description Normal menu Single menu Select Mode of P.IN P. Display Press the PinP buttonSet / Clear Keystone Mode Press the Keystone button Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input Menu DescriptionImage Menu Image Menu DescriptionOptions Menu Options Menu DescriptionOperation Start/Stop Press No Signal MenuNo Signal Menu Operation Start/Stop Press the or buttonLamp MaintenanceLamp Life Resetting the Lamp Timer MaintenanceReplacing the Lamp Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Signal Connector Pin Assignment Dimension DiagramTechnical Example of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF FCC Statement Warning Regulatory NoticesFor the Customers in Canada Pour les utilisateurs au Canada Page Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France

CP-SX5600W specifications

The Hitachi CP-SX5600W is a high-performance projector designed to cater to the needs of educational institutions and businesses alike. This model is a part of Hitachi's extensive lineup, known for its reliability and advanced features that enhance presentations and viewing experiences. One of the standout features of the CP-SX5600W is its impressive brightness, delivering up to 5,500 ANSI lumens, which ensures clear and vibrant images even in well-lit environments. With a native resolution of WXGA (1280 x 800), this projector delivers sharp visuals that cater perfectly to today's widescreen content.

Another notable characteristic of the CP-SX5600W is its advanced color technology. Hitachi employs a powerful 3LCD technology, which offers vivid color reproduction and accurate color representation. This results in rich and lifelike colors, making it ideal for presentations that utilize graphics and videos. The contrast ratio of 2000:1 further enhances image quality by providing deeper blacks and brighter whites, ensuring that details are visible in both shadowy and brightly lit areas.

The projector also features flexible connectivity options, including HDMI, VGA, and composite inputs, allowing it to seamlessly connect with a variety of devices like laptops, document cameras, and media players. This flexibility makes it an excellent choice for multi-purpose environments. Additionally, the CP-SX5600W is equipped with a built-in 16-watt speaker, providing adequate audio output without the need for external speakers, enhancing the overall experience during presentations and lectures.

One of the essential technologies integrated into the CP-SX5600W is the Hitachi’s Intelligent Eco mode. This feature automatically adjusts the lamp brightness according to the content being displayed, extending the lifespan of the lamp and reducing energy consumption. This not only contributes to lower operational costs but also aligns with environmentally friendly practices.

Portability is another advantage with the CP-SX5600W, as it is designed to be compact and lightweight, making it easy to transport between different locations. Its intuitive user interface and remote control make setup and operation user-friendly, ensuring that even those with minimal technical expertise can effectively utilize the projector.

In conclusion, the Hitachi CP-SX5600W stands out in the projector market with its blend of brightness, advanced technology, and user-friendly features, making it a perfect choice for educational, corporate, and event uses. Its emphasis on quality, flexibility, and efficiency ensures that it meets the diverse needs of users while delivering remarkable performance.