Hitachi CP-SX5600W user manual Air Filter, Other Maintenance

Page 20

MAINTENANCE (continued)

Air Filter

Replacing the Air Filter

Replace the air filter if contamination cannot be

Filter box

removed, or if it is damaged.

 

1.

Remove the filter lid.

 

2.

Pull and remove the old filter from the filter box.

 

3.

Insert the new filter to the filter box. Push left

Filter Lid

 

and right edges of the filter with fingers in order

 

 

 

to fit the filter to the box properly. Check that

 

 

there is no gap between the filter and plastics at

 

 

top, left and right side edge of the filter.

Filter

4.

Set the filter lid.

 

Cleaning the air Filter

The air filter should be cleaned as described below at intervals of approximately 300 hours.

1.Switch the projector power supply OFF, and remove the power cord from the power outlet.

2.Clean the air filter with a vacuum cleaner.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

•Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case. For the optional air filter, see the item “Optional Parts” of the Table 12.

•Do not use the equipment with the air filter removed.

•When the air filter is clogged with dust etc. the power supply is switched OFF automatically to prevent the temperature rising inside the projector.

Other Maintenance

Maintenance Inside the Equipment

For safety reasons, ensure that the equipment is cleaned and checked by the dealer once every two years. Maintaining the equipment by yourself is dangerous.

Cleaning the Lens

Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.

Cleaning the Cabinet and Remote control transmitter

Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “SAFETY

INSTRUCTIONS” thoroughly to ensure that maintenance is performed correctly.

•Do not use detergents or chemicals other than those noted above (e.g. benzene or thinners).

•Do not use cleaning sprays.

•Do not rub with hard materials, or tap the equipment.

NOTE • When this projector is brought into a warm room from a cold outdoor, condensation can take place on the projection lens and mirror inside, blurring the screen and reducing your eyesight, but do not worry. The condensation will disappear and the screen will return to a normal condition no sooner than the projector acclimates to the surrounding temperature.

ENGLISH-19

ENGLISH

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CP-SX5600W Contents Before USE FeaturesContents of package Before USE Part NamesENGLISH-4 Loading the Batteries Installation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of System Setup Power on Power OFFOperations Equipment is used safelyBasic Operation Description OperationsBasic Operation Select Mode of P.IN P. Display Press the PinP button Set / Clear Keystone Mode Press the Keystone buttonNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuAutomatic Adjustment at RGB Input Select the Execute with Automatic Adjustment at Video Input Select the Execute withInput Menu Input Menu DescriptionImage Menu Image Menu DescriptionOptions Menu Options Menu DescriptionNo Signal Menu No Signal MenuOperation Start/Stop Press Operation Start/Stop Press the or buttonLamp Life MaintenanceLamp Replacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterTroubleshooting Message ContentsOSD Message OSD MessageTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals Connection to the Mouse Control PS/2, ADB or Serial MouseUSB Mouse PS/2 MouseADB Mouse Serial MouseCommunications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Page Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-SX5600W specifications

The Hitachi CP-SX5600W is a high-performance projector designed to cater to the needs of educational institutions and businesses alike. This model is a part of Hitachi's extensive lineup, known for its reliability and advanced features that enhance presentations and viewing experiences. One of the standout features of the CP-SX5600W is its impressive brightness, delivering up to 5,500 ANSI lumens, which ensures clear and vibrant images even in well-lit environments. With a native resolution of WXGA (1280 x 800), this projector delivers sharp visuals that cater perfectly to today's widescreen content.

Another notable characteristic of the CP-SX5600W is its advanced color technology. Hitachi employs a powerful 3LCD technology, which offers vivid color reproduction and accurate color representation. This results in rich and lifelike colors, making it ideal for presentations that utilize graphics and videos. The contrast ratio of 2000:1 further enhances image quality by providing deeper blacks and brighter whites, ensuring that details are visible in both shadowy and brightly lit areas.

The projector also features flexible connectivity options, including HDMI, VGA, and composite inputs, allowing it to seamlessly connect with a variety of devices like laptops, document cameras, and media players. This flexibility makes it an excellent choice for multi-purpose environments. Additionally, the CP-SX5600W is equipped with a built-in 16-watt speaker, providing adequate audio output without the need for external speakers, enhancing the overall experience during presentations and lectures.

One of the essential technologies integrated into the CP-SX5600W is the Hitachi’s Intelligent Eco mode. This feature automatically adjusts the lamp brightness according to the content being displayed, extending the lifespan of the lamp and reducing energy consumption. This not only contributes to lower operational costs but also aligns with environmentally friendly practices.

Portability is another advantage with the CP-SX5600W, as it is designed to be compact and lightweight, making it easy to transport between different locations. Its intuitive user interface and remote control make setup and operation user-friendly, ensuring that even those with minimal technical expertise can effectively utilize the projector.

In conclusion, the Hitachi CP-SX5600W stands out in the projector market with its blend of brightness, advanced technology, and user-friendly features, making it a perfect choice for educational, corporate, and event uses. Its emphasis on quality, flexibility, and efficiency ensures that it meets the diverse needs of users while delivering remarkable performance.
Top Page Image Contents