Hitachi CP-SX5600W user manual Troubleshooting, OSD Message, Message Contents

Page 21

TROUBLESHOOTING

OSD Message

The messages as described below may appear on the screen at power ON. Take the appropriate measures when such a message appears.

Table 9. OSD Message

Message

Contents

 

 

 

The message shown at left appears after the lamp has

CHANGE THE LAMP

been used for more than 1300 hours.

The lamp is approaching the end of its life.

AFTER REPLACING LAMP,

Power is switched OFF automatically when the lamp

RESET THE LAMP TIME.

reaches the end of its life. Prepare a new lamp for

*1)

 

installation.

 

Always reset the lamp timer after replacing the lamp.

 

 

CHANGE THE LAMP

The lamp will reach the end of its life in ** hours.

AFTER REPLACING LAMP,

RESET THE LAMP TIME.

Power will be switched OFF automatically in ** hours.

THE POWER WILL TURN OFF

Replace the lamp as shown in P.17~18 “Lamp”.

AFTER ** hr.

Always reset the lamp timer after replacing the lamp.

*1)

 

 

 

CHANGE THE LAMP

The lamp has reached the end of its life. Power will be

AFTER REPLACING LAMP,

switched OFF in a few minutes.

RESET THE LAMP TIME.

Switch power OFF immediately and replace the lamp as

THE POWER WILL

shown in P.17~18 “Lamp”.

TURN OFF

Always reset the lamp timer after replacing the lamp.

AFTER 0 hr.

 

 

 

NO INPUT IS DETECTED

No input signal found.

ON ***

Check signal input connections and signal sources.

 

 

 

The horizontal or vertical frequency of the input signal is

SYNC IS OUT OF RANGE

not within the specified range.

ON ***

Check the specifications of the equipment and the signal

 

source.

 

 

 

The internal temperature has risen.

 

Switch power OFF, and wait 20 minutes until the

 

equipment cools.

CHECK THE AIR FLOW

Check the following and Switch power ON again.

 

* Are the ventilation openings blocked.

 

* Is the air filter dirty.

 

* Is the ambient temperature in excess of 35°C.

 

 

NOTE *1) This message is cleared automatically after approximately three minutes, and appears

every time power is switched ON.

ENGLISH-20

Image 21
Contents CP-SX5600W Contents Features Contents of packageBefore USE Part Names Before USEENGLISH-4 Loading the Batteries Installation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceInstallation CablingCabling Power Connection Example of System SetupPlug & Play Power OFF Power onOperations Equipment is used safelyOperations Basic OperationBasic Operation Description Set / Clear Keystone Mode Press the Keystone button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuAutomatic Adjustment at Video Input Select the Execute with Automatic Adjustment at RGB Input Select the Execute withInput Menu Input Menu DescriptionImage Menu Description Image MenuOptions Menu Description Options MenuNo Signal Menu No Signal MenuOperation Start/Stop Press Operation Start/Stop Press the or buttonMaintenance LampLamp Life Maintenance Resetting the Lamp TimerReplacing the Lamp Air Filter Other MaintenanceMessage Contents TroubleshootingOSD Message OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Dimension Diagram Signal Connector Pin AssignmentTechnical Technical Example of computer signalInitial set signals PS/2, ADB or Serial Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseSerial Mouse ADB MouseCommand data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Page Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi France

CP-SX5600W specifications

The Hitachi CP-SX5600W is a high-performance projector designed to cater to the needs of educational institutions and businesses alike. This model is a part of Hitachi's extensive lineup, known for its reliability and advanced features that enhance presentations and viewing experiences. One of the standout features of the CP-SX5600W is its impressive brightness, delivering up to 5,500 ANSI lumens, which ensures clear and vibrant images even in well-lit environments. With a native resolution of WXGA (1280 x 800), this projector delivers sharp visuals that cater perfectly to today's widescreen content.

Another notable characteristic of the CP-SX5600W is its advanced color technology. Hitachi employs a powerful 3LCD technology, which offers vivid color reproduction and accurate color representation. This results in rich and lifelike colors, making it ideal for presentations that utilize graphics and videos. The contrast ratio of 2000:1 further enhances image quality by providing deeper blacks and brighter whites, ensuring that details are visible in both shadowy and brightly lit areas.

The projector also features flexible connectivity options, including HDMI, VGA, and composite inputs, allowing it to seamlessly connect with a variety of devices like laptops, document cameras, and media players. This flexibility makes it an excellent choice for multi-purpose environments. Additionally, the CP-SX5600W is equipped with a built-in 16-watt speaker, providing adequate audio output without the need for external speakers, enhancing the overall experience during presentations and lectures.

One of the essential technologies integrated into the CP-SX5600W is the Hitachi’s Intelligent Eco mode. This feature automatically adjusts the lamp brightness according to the content being displayed, extending the lifespan of the lamp and reducing energy consumption. This not only contributes to lower operational costs but also aligns with environmentally friendly practices.

Portability is another advantage with the CP-SX5600W, as it is designed to be compact and lightweight, making it easy to transport between different locations. Its intuitive user interface and remote control make setup and operation user-friendly, ensuring that even those with minimal technical expertise can effectively utilize the projector.

In conclusion, the Hitachi CP-SX5600W stands out in the projector market with its blend of brightness, advanced technology, and user-friendly features, making it a perfect choice for educational, corporate, and event uses. Its emphasis on quality, flexibility, and efficiency ensures that it meets the diverse needs of users while delivering remarkable performance.