Hitachi 51G500S important safety instructions Connecting AN S-VIDEO Source to Input 3, 4

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5

1.Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID4 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically

after approximately four seconds.

5.Press the ANT button to return to the previous channel.

FIRST TIME USE

ANT A

TO

CONVERTER

ANT B

AUDIO

TO HI-FI

L

R

			DVI-HDTV
	PR	PB	Y
INPUT 1
	R	(MONO)/L
			AUDIO
	PR	PB	Y/VIDEO
INPUT 2	R	(MONO)/L
			AUDIO
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 3
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 4
			VIDEO	S-VIDEO
MONITOR
OUT
		AUDIO

R OUTPUTL V

S-VIDEO

VCR

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 3 in example on page 11) Refer to your VCR operating guide for more information on line input-output connections.

17