Hitachi 51G500S Split Mode PICTURE-IN-PICTURE, Surf button PICTURE-IN-PICTURE, Swap button

PICTURE-IN-PICTURE (PIP)

SPLIT MODE PICTURE-IN-PICTURE

Split Mode PIP displays the main picture and sub-picture evenly on the screen.

	Ant A 10	Ant A 12
Main Picture			Sub Picture

bSURF button PICTURE-IN-PICTURE

This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures. Press the SURF button a second time to remove the sub-pictures from the screen.

Ant A 28

SURF

09
10	SURF
12

THE REMOTE CONTROL

NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory (see page 42).

2.If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.

3.SURF MODE PIP is allowed only when ANT A is selected as the main channel.

4.If MOVIE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated.

5.Closed Caption will not appear when SURF mode is on.

cSWAP button

If you wish to enable the Audio from the Main Picture to the Sub-Picture, press the SWAP button.

Ant A 10	Ant A 12	Ant A 10	Ant A 12
SPLIT		SWAP
Green Highlight			Green Highlight

NOTE: The SWAP button will only operate in POP/SPLIT/PIP mode.

dPIP MODE button

To change between the different PIP modes (POP, PIP or SPLIT) press the PIP MODE button when PIP is ON. Each press of this button will change PIP to a different mode.

Ant A 10

Ant A 10	Ant A 12
PIP MODE	PIP MODE

Ant A 12

PIP MODES will depend on the type of input signal.

PICTURE-IN-PICTURE (PIP) MODES

POP PIP SPLIT SURF

NTSC (ANT A/B)	YES	x	YES	ANT A
480i	YES	x	YES	x
480p	x	x	YES	x
720p	x	x	YES	x
1080i	x	YES	YES	x

26