Hitachi 51G500S DVD Player, Connecting a Component Source to Input 1 or 2 Y-PBPR

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set at right.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the VID1 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO label disappears automatically after approximately four seconds.

7.Press the ANT button to return to the previous channel.

FIRST TIME USE

DVD Player

OUTPUT

PR PB Y L R

				DVI-HDTV
ANT A		PR	PB	Y
	INPUT 1
TO		R	(MONO)/L
CONVERTER
			PB	Y/VIDEO
ANT B	INPUT 2	R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO	S-VIDEO
	INPUT 3
		R	(MONO)/L	VIDEO	S-VIDEO
	INPUT 4
AUDIO
TO HI-FI		R	L	VIDEO
					S-VIDEO
L	MONITOR
	OUT
			AUDIO
R

NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.See page 12 for tips on REAR PANEL CONNECTIONS.

19