Hitachi CPX430W user manual Loading the Batteries

Page 6

BEFORE USE (continued)

Loading the Batteries

Install the AA batteries into the remote control

transmitter.
1.	Remove the battery cover.
	Push the knob while lifting up the battery cover.
2.	Load the batteries.
	Make sure the plus and minus poles are correctly	1	2
	oriented.	1	2
	oriented.
3.	Close the battery cover.

CAUTION • Use only the specified batteries with this remote control transmitter. Also, do not mix new and old batteries. This could cause in

battery cracking or leakage, which could result in fire or personal injury.

•When loading the batteries, make sure the plus and minus terminals are correctly oriented as indicated in the remote control transmitter. Incorrect orientation could cause battery cracking or leakage, which could result in personal injury or pollution of the surrounding environment.

•When you dispose the battery, you should obey the law in the relative area or country.

•Keep the battery away from children and pets.

•When not to be used for an extended period, remove the batteries from the remote control transmitter.

NOTE Replace the batteries when remote control transmitter operation becomes difficult.

ENGLISH

ENGLISH-5

Image 6

Contents CPX430W Contents Features Contents of PackageBefore USE Before USE Part NamesComponent Video Transmitter Refer to P.9 OperationsLoading the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceInstallation CablingCabling Power Connection Example of system setupPlug & Play Operations Power onPower OFF StandbyOperations Basic OperationBasic Operation Description Normal menu Setup Menu Setup MenuInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuStart UP Image MenuImage Menu Description MirrorSelect Menu Background Color Select with Options MenuOptions Menu Select Menu Display Language Select withNo Signal Menu No Signal Menu DescriptionReduce Increase Lamp MaintenanceLamp Lamp LifeMaintenance Resetting the Lamp TimerReplacing the Lamp Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Dimension Diagram Signal Connector Pin AssignmentTechnical Example of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Page Hitachi Atago Building