Hitachi CPX430W user manual Input Menu, Automatic Adjustment at RGB Input Select the Execute with

Page 14

OPERATIONS (continued)

Input Menu

The following functions are available when INPUT is selected on the

menu. Select an item with the and buttons, and start or stop

operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode.

Table 5. Input Menu

SETUP

INPUT

IMAGE

OPT.

ENGLISH

AUTO

 

EXECUTE

 

RGB

 

CANCEL

 

VIDEO

 

 

 

HDTV

 

 

 

 

 

 

 

Item

Description

 

Automatic Adjustment at RGB Input: Select the EXECUTE with the

 

button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock

 

phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.

 

Use with the window at maximum size in the application display.

AUTO

Automatic Adjustment at Video Input: Select the EXECUTE with the

button. A signal type appropriate for the input signal is selected

 

automatically when EXECUTE is selected automatically. Valid only when

 

AUTO is set for VIDEO on the menu.

 

• This operation requires approximately 10 seconds. It may not function correctly with

 

some input signals. Pressing the AUTO button in this case may correct this problem.

 

• This function is the same as for the AUTO function in Basic operation.

 

 

RGB

Displays RGB Input Frequency: Displays the horizontal and vertical sync

signal frequencies for RGB input.

 

• Valid only at RGB input.

 

 

Select Video Signal Type: Select the signal type with the and buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the input signal. The selection of AUTO enables and executes the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.

Use this function when the image becomes unstable (eg. the image becomes VIDEO (**) irregular, or lacks color) at VIDEO/S-VIDEO input.

Automatic Adjustment requires approximately 10 seconds. It may not function correctly with some input signals. Pressing the AUTO button in this case may correct this problem except for the N-PAL input.

For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the signal of HDTV.

HDTV

Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the input signal with the / button.

ENGLISH-13

Image 14
Contents CPX430W Contents Before USE FeaturesContents of Package Component Video Before USEPart Names Transmitter Refer to P.9 OperationsLoading the Batteries Angle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of system setup Operations Power onPower OFF StandbyBasic Operation Description OperationsBasic Operation Normal menu Setup Menu Setup MenuInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuStart UP Image MenuImage Menu Description MirrorSelect Menu Background Color Select with Options MenuOptions Menu Select Menu Display Language Select withReduce Increase No Signal MenuNo Signal Menu Description Lamp MaintenanceLamp Lamp LifeReplacing the Lamp MaintenanceResetting the Lamp Timer Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Example of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Page Hitachi Atago Building