Hitachi CP-X955E specifications Be careful in handling the power cord

Page 5

Warning

LBe careful in handling the power cord.

•Do not scratch, damage or process the power cord. Do not bend it forcibly. Also do not put a

heavy object on it, do not heat it and do not pull it. If you do, the power cord may be damaged and it may cause a fire, electric shock, etc.

•Do not pull the cord.

•Do not put a heavy object on it.

•Do not damage the cord.

•Do not put it near a heating device.

•Be careful that this unit is not placed on the power cord. The power cord may be damaged and it may cause a fire, electric shock, etc. If the cord is covered with a carpet, etc. a heavy object may be put on it without your realizing it.

•If the cord is damaged (core wire is exposed, disconnected, etc.), ask

your dealer to replace it. It may cause a fire, electric shock, etc.

•Check that no dirt adheres to the power plug and fully insert without any play. If dirt adheres or the connection is incomplete, it may cause a fire, electric shock, etc.

•The outer shield of power cord must be connected to ground.

If you do not, it may cause a electric shock.

LDo not stare directly into the laser

aperture.

•The laser pointer on the remote control unit radiates the laser beam

from the laser aperture.

•Do not stare into the laser aperture or radiate the laser beam to other persons as the laser emitted

is a class II laser and it could damage you vision, etc.

Especially pay attention if children are present.

•The three labels below are caution labels for the laser beam.

AVOIDE EXPOSURE–LASER

RADIATION IS EMITTED

FROM THIS APERTURE

LASER APERTURE

C A U T I O N

LASER RADIATION-

DO NOT STARE INTO BEAM

WAVE LENGTH:670nm

MAX. OUTPUT:1mW

CLASS II LASER PRODUCT

RADIAZIONI LASER

NON GUARDARE NEL RAGGIO LUCE APPARECCHIO LASER DI CLASSE 2

RAYONNEMENT LASER

MANUFACTURED

NE PAS REGARDER DANS

 

LE FAISCEAU APPAREIL

August-97

A LASER DE CLASSE 2

 

LASER-STRAHLUNG

 

NICHT IN DEN STRAHL

 

BLICKEN LASER KLASSE2

MANUFACTURER:A

 

MADE IN JAPAN

5

Downloaded from www.Manualslib.com manuals search engine

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ContentsPage FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Video inputsLDo not install this unit in an unstable Do not look directly at the lens when the lamp is litDo not use power supplies other than that specified LIf any abnormality occursDo not stare directly into the laser Aperture Be careful in handling the power cordHandle the power cord carefully CleaningClean inside the unit at least once two years When you are not going to use for a long timeVolume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinetStandby / on Names and functions of each partMain unit Laser on Remote control transmitterDisk PAD Class II Laser Product Remove the battery compartment coverInstallation of liquid crystal projector InstallationView from the top View from the side View from the front View from the sideBasic operations Turn the Main Power switch of the projector on. I onPress the STANDBY/ON button, for 1 second Plug & PlayPress the Menu buttons or the Menu on / OFF button Adjustments and functionsBright SET UPContrast TintTest Pattern InputImage Blank OPT. OptionStart UP TimerConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Connection to the RGB signal terminalData Hsync Initial set signalsMouse emulation Connection to the control signal terminalControl signal terminal Connection to the control signal terminal Communication Control command codeControl data table Procedure of getting the Projector status Connecting various equipment Example of system setupCleaning the air filter Re-install the air filter Clean the air filter using a vacuum cleanerLamp Message tableIndicator display When you think something wrongDimension diagram

CP-X955E specifications

The Hitachi CP-X955E is a highly efficient and versatile multimedia projector designed for various environments, including corporate settings, educational institutions, and public presentations. This projector stands out due to its impressive brightness, vivid color reproduction, and advanced features that cater to professional presentations.

One of the standout features of the CP-X955E is its brightness, which boasts up to 5,000 ANSI lumens. This high brightness level ensures clear and vibrant images even in well-lit rooms, making it ideal for classrooms, conference rooms, and large auditoriums. The resolution of the projector is XGA (1024 x 768), providing sharp images and detailed presentations, while its 4:3 aspect ratio is suitable for most traditional content formats.

The CP-X955E incorporates Hitachi's proprietary technologies to enhance image quality and usability. The Dynamic Contrast feature adjusts the brightness of light output based on the content displayed, resulting in deeper blacks and brighter whites. This technology enhances the overall viewing experience, allowing users to deliver impactful presentations that capture the audience's attention.

Another notable characteristic of the CP-X955E is its ease of use and flexible connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video connections, allowing users to connect a variety of devices, such as laptops, DVD players, and more. Its built-in 10-watt speaker provides adequate sound output for small to medium-sized rooms, reducing the need for external audio equipment.

The user-friendly interface and remote control enhance the overall experience by allowing seamless navigation through settings and functions. Additionally, the projector features a straightforward setup process, making it accessible for users of varying technical expertise.

For added convenience, the projector supports a wide range of user-oriented features such as automatic vertical keystone correction, which maintains the image's shape even when the projector is angled. The eco-friendly design of the CP-X955E also emphasizes reduced power consumption and extended lamp life, with the lamp lasting up to 5,000 hours in eco-mode.

In summary, the Hitachi CP-X955E combines brightness, advanced imaging technologies, and user-friendly features, making it an excellent choice for professionals who demand reliability and high performance in their presentations. Its robust design and versatility ensure it meets the needs of various applications, affirming its position as a dependable multimedia projector in the market.
Top Page Image Contents