Hitachi CP-X955E Basic operations, Turn the Main Power switch of the projector on. I on

Page 12
Press the INPUT button or the INPUT SELECT (VIDEO or RGB) button to select the source of the signal
to be projected on the screen.Example on-screen display
• The selected signal input is displayed at the bottom right of the screen.
RGB 1
Power on all connected equipment.
The method of connecting various equipment, see on the page 19 ∼ 27.
• Lens cover opens.
4 Adjust the picture size using the ZOOM button.
5 Adjust the focus using the FOCUS button.
(1) Press the FOCUS button. The on-screen display shown on the right appears.
(2) Adjust the focus so that the picture is clear using the FOCUS button.
(3) When any other button is pressed, “FOCUS” on the screen will be turned off.
Turn the lens cover lever down.
7
6
3
Press the STANDBY/ON button.
2
• The ON indicator will light up orange.
INPUT
3

Basic operations

To project the picture

5

4

7

2

2

4

1 7

STANDBY/ON MUTE

FOCUS ZOOM VOLUME

POSITION ON

LASER

5

RESET

RIGHT

MENU ON

MOUSE ON

BLANK

TIMER

RGB 1/2

VIDEO 1/2

1 Turn the MAIN POWER switch of the projector on. [ I : ON]

•The ON indicator blinks (green) and then lights (green).

•The ON indicator will blink green during warm-up and light up.

+++FOCUS+++

12

Downloaded from www.Manualslib.com manuals search engine

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Features ContentsPageOutline Operating GuideFor the Customers in U.K Video signal cables Power cordBefore use Video inputsDo not look directly at the lens when the lamp is lit LDo not install this unit in an unstableDo not use power supplies other than that specified LIf any abnormality occursBe careful in handling the power cord Do not stare directly into the laser ApertureCleaning Handle the power cord carefullyClean inside the unit at least once two years When you are not going to use for a long timeDo not place this unit where it gets hot VolumeCleaning the lens Cleaning the cabinetNames and functions of each part Main unitStandby / on Remote control transmitter Disk PADLaser on Remove the battery compartment cover Class II Laser ProductInstallation Installation of liquid crystal projectorView from the top View from the side View from the front View from the sideTurn the Main Power switch of the projector on. I on Basic operationsPlug & Play Press the STANDBY/ON button, for 1 secondAdjustments and functions Press the Menu buttons or the Menu on / OFF buttonSET UP BrightContrast TintInput ImageTest Pattern OPT. Option BlankTimer Start UPConnection to the video signal terminals Connection to the RGB signal terminalConnection to the RGB signal terminal Example of computer signalInitial set signals Data HsyncConnection to the control signal terminal Control signal terminalMouse emulation Connection to the control signal terminal Control command code CommunicationControl data table Procedure of getting the Projector status Example of system setup Cleaning the air filterConnecting various equipment Clean the air filter using a vacuum cleaner Re-install the air filterLamp Message tableWhen you think something wrong Indicator displayDimension diagram

CP-X955E specifications

The Hitachi CP-X955E is a highly efficient and versatile multimedia projector designed for various environments, including corporate settings, educational institutions, and public presentations. This projector stands out due to its impressive brightness, vivid color reproduction, and advanced features that cater to professional presentations.

One of the standout features of the CP-X955E is its brightness, which boasts up to 5,000 ANSI lumens. This high brightness level ensures clear and vibrant images even in well-lit rooms, making it ideal for classrooms, conference rooms, and large auditoriums. The resolution of the projector is XGA (1024 x 768), providing sharp images and detailed presentations, while its 4:3 aspect ratio is suitable for most traditional content formats.

The CP-X955E incorporates Hitachi's proprietary technologies to enhance image quality and usability. The Dynamic Contrast feature adjusts the brightness of light output based on the content displayed, resulting in deeper blacks and brighter whites. This technology enhances the overall viewing experience, allowing users to deliver impactful presentations that capture the audience's attention.

Another notable characteristic of the CP-X955E is its ease of use and flexible connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video connections, allowing users to connect a variety of devices, such as laptops, DVD players, and more. Its built-in 10-watt speaker provides adequate sound output for small to medium-sized rooms, reducing the need for external audio equipment.

The user-friendly interface and remote control enhance the overall experience by allowing seamless navigation through settings and functions. Additionally, the projector features a straightforward setup process, making it accessible for users of varying technical expertise.

For added convenience, the projector supports a wide range of user-oriented features such as automatic vertical keystone correction, which maintains the image's shape even when the projector is angled. The eco-friendly design of the CP-X955E also emphasizes reduced power consumption and extended lamp life, with the lamp lasting up to 5,000 hours in eco-mode.

In summary, the Hitachi CP-X955E combines brightness, advanced imaging technologies, and user-friendly features, making it an excellent choice for professionals who demand reliability and high performance in their presentations. Its robust design and versatility ensure it meets the needs of various applications, affirming its position as a dependable multimedia projector in the market.
Top Page Image Contents