Hitachi CP-X955E specifications When you think something wrong, Indicator display

Page 29

Indicator display

The ON indicator, LAMP indicator and TEMP indicator will light or blink in the following cases.

 

Indicator status

Meaning

Remedy

 

 

 

 

 

Lights orange

Standby mode

—————————————

 

 

 

 

 

Blinks green

During warming up

—————————————

ON indicator

 

 

 

Lights green

During operation

—————————————

 

 

 

 

 

Blinks orange

During cooling down

—————————————

 

 

 

 

 

Lights red

Under the mode

Under the method

 

 

 

 

LAMP indicator

Lights red

Lamp cannot light

Cool projector by power off for 20 minutes.

 

 

 

 

TEMP indicator

Lights red

Temperature inside too high

Correctly reinstall so as not to block ventilation holes.

 

 

 

Blinks red

Cooling fan accidented

Call a maintenance person.

 

 

 

 

 

When the LAMP indicator lights, turn the power off. If the problem cannot be recovered, contact your dealer.

When you think something wrong

Check the following again before asking for service.

If the trouble cannot be recovered, consult your dealer.

Phenomena

Cause

Check point

 

Page

 

 

 

 

 

 

 

Power cannot be turned

• The Main power is not turned on.

• Turn the MAIN POWER switch on.

 

P12

 

on.

• The power cord is disconnected.

• Insert the power cord into an AC socket.

 

P8

 

 

 

 

 

 

 

 

 

 

No picture and sound

• The setting of the input source is not

• Set the correct input using the input select

 

P8, P9

 

 

correct.

button of the projector or the remote

 

P12, P16

 

 

 

control.

 

 

 

 

 

• Wiring to the projector is not correct.

• Connect the cable correctly.

 

P8, P27

 

 

 

 

 

 

 

Only picture is displayed

• Wiring to the projector is not correct.

• Connect the cable correctly.

 

P8, P27

 

with no sound

• The volume is set to minimum.

• Press the VOL button or press the MENU

 

P9

 

 

 

 

 

• The unit enters the mute mode.

button and adjust the volume.

 

P8, P9

 

 

• Press the MUTE button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only sound is heard

• Wiring to the projector is not correct.

• Connect the cable correctly.

 

P8, P27

 

without a picture

• The brightness is set fully to the dark side.

• Press the MENU button and select

 

P15

 

 

 

 

 

 

BRIGHT and press the

button.

 

 

 

 

 

• Turn the lens cover lever down and lens

 

 

 

 

 

cover opens.

 

 

 

 

 

 

 

 

 

 

Color is weak and tint is

The color and tint have been adjusted

Adjust the color and tint correctly.

 

P15

 

incorrect

incorrectly.

 

 

 

 

 

 

 

 

 

 

 

Picture is dark

• The brightness and contrast has been

• Adjust the brightness and contrast

 

P15

 

 

adjusted incorrectly.

correctly.

 

 

 

 

 

• The lamp has not been adjusted.

• Replace the lamp with a new one.

 

P28

 

 

 

 

 

 

 

Picture is not clear

Focus or H.PHASE is not matched.

Adjust the focus or H.PHASE.

 

P12, P15

 

 

 

 

 

 

 

LAMP indicator lights red.

Trouble with the lamp.

Turn off the power and leave for 20 minutes ;

 

P29

 

 

 

then turn the power on again.

 

 

 

 

 

 

 

 

 

TEMP indicator lights red.

Inside the projector too hot.

• Do not block the venational holes.

 

P6, P29

 

 

 

• Clean the air filter.

 

 

 

 

 

 

• Use the projector under 35˚C

 

 

 

 

 

temperature.

 

 

 

 

 

 

 

 

 

 

A bright dot may be seen in the picture. This is a phenomenon peculiar to the liquid crystal and is not a problem.

29

Downloaded from www.Manualslib.com manuals search engine

Page 28 Page 30
Image 29
Page 28 Page 30
Contents ContentsPage FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Video inputsLDo not install this unit in an unstable Do not look directly at the lens when the lamp is litDo not use power supplies other than that specified LIf any abnormality occursDo not stare directly into the laser Aperture Be careful in handling the power cordHandle the power cord carefully CleaningClean inside the unit at least once two years When you are not going to use for a long timeVolume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinetStandby / on Names and functions of each partMain unit Laser on Remote control transmitterDisk PAD Class II Laser Product Remove the battery compartment coverInstallation of liquid crystal projector InstallationView from the top View from the side View from the front View from the sideBasic operations Turn the Main Power switch of the projector on. I onPress the STANDBY/ON button, for 1 second Plug & PlayPress the Menu buttons or the Menu on / OFF button Adjustments and functionsBright SET UPContrast TintTest Pattern InputImage Blank OPT. OptionStart UP TimerConnection to the RGB signal terminal Connection to the video signal terminalsExample of computer signal Connection to the RGB signal terminalData Hsync Initial set signalsMouse emulation Connection to the control signal terminalControl signal terminal Connection to the control signal terminal Communication Control command codeControl data table Procedure of getting the Projector status Connecting various equipment Example of system setupCleaning the air filter Re-install the air filter Clean the air filter using a vacuum cleanerLamp Message tableIndicator display When you think something wrongDimension diagram

CP-X955E specifications

The Hitachi CP-X955E is a highly efficient and versatile multimedia projector designed for various environments, including corporate settings, educational institutions, and public presentations. This projector stands out due to its impressive brightness, vivid color reproduction, and advanced features that cater to professional presentations.

One of the standout features of the CP-X955E is its brightness, which boasts up to 5,000 ANSI lumens. This high brightness level ensures clear and vibrant images even in well-lit rooms, making it ideal for classrooms, conference rooms, and large auditoriums. The resolution of the projector is XGA (1024 x 768), providing sharp images and detailed presentations, while its 4:3 aspect ratio is suitable for most traditional content formats.

The CP-X955E incorporates Hitachi's proprietary technologies to enhance image quality and usability. The Dynamic Contrast feature adjusts the brightness of light output based on the content displayed, resulting in deeper blacks and brighter whites. This technology enhances the overall viewing experience, allowing users to deliver impactful presentations that capture the audience's attention.

Another notable characteristic of the CP-X955E is its ease of use and flexible connectivity options. The projector is equipped with multiple input terminals, including HDMI, VGA, and composite video connections, allowing users to connect a variety of devices, such as laptops, DVD players, and more. Its built-in 10-watt speaker provides adequate sound output for small to medium-sized rooms, reducing the need for external audio equipment.

The user-friendly interface and remote control enhance the overall experience by allowing seamless navigation through settings and functions. Additionally, the projector features a straightforward setup process, making it accessible for users of varying technical expertise.

For added convenience, the projector supports a wide range of user-oriented features such as automatic vertical keystone correction, which maintains the image's shape even when the projector is angled. The eco-friendly design of the CP-X955E also emphasizes reduced power consumption and extended lamp life, with the lamp lasting up to 5,000 hours in eco-mode.

In summary, the Hitachi CP-X955E combines brightness, advanced imaging technologies, and user-friendly features, making it an excellent choice for professionals who demand reliability and high performance in their presentations. Its robust design and versatility ensure it meets the needs of various applications, affirming its position as a dependable multimedia projector in the market.
Top Page Image Contents