Lantronix 900-510 Logout Button Tabs Options, Apply Button, Port Number Bar Icons Help Button

5: Web and Command Line Interfaces

Logout Button

Tabs

Options

Entry Fields and

Optons

Apply Button

Figure 5-1. Web Page Layout

Port

Number Bar

Icons

Help

Button

The web page has the following components:

Tabs: Groups of settings to configure.

Options: Below each tab are options for specific types of settings.

Note: Only those options for which the currently logged-in user has rights display.

Port, Switch, and Power Outlet Bar:

The E1 and E2 buttons display the Network – Settings page.

The left-most number buttons allow you to select a port and display its settings. Only ports to which the currently logged-in user has rights are enabled.

Below the bar are two options for use with the port buttons. Selecting a port and the Configuration option takes you to the Device Port Settings page. Selecting a port and the WebSSH option displays the WebSSH window for the device port -- if Web SSH is enabled, and if SSH is enabled for the device port.

S (switch) buttons refer to the unmanaged Ethernet switch ports on the back of the unit. The firmware does not currently configure or control them.

Buttons P1 - P4 enable you to select a power outlet and display the Power Outlets page with the selected outlet's information highlighted.

The A and B buttons display the status of the power supplies.

Entry Fields and Options: Allow you to enter data and select options for the settings.

SLB™ Branch Office Manager User Guide 41