Lantronix 900-510 manual SLB Firmware

		12: Maintenance and Operation
	Login Banner	The text to display on the command line interface after the user
		logs in. Default is blank.
		Note: To create more lines, use the \n character sequence.
	Logout Banner	The text to display on the command line interface after the user
		logs out. Default is blank.
		Note: To create more lines use, the \n character sequence.
	Web Timeout	Number of minutes (5-120) after which the SLB web session
		times out. The default is 5. To avoid timeouts, select No.
		If the session times out, refresh the browser page and enter
		your user id and password to open another web session.
		Note: If you close the browser without logging off the SLB
		branch office manager first, you will have to wait for the timeout
		time to expire. You can also end a web session by using the
		admin web terminate command at the CLI or by asking
		your system administrator to terminate your active web session.
		To view or terminate current web sessions, click the Web
		Sessions link. (See Firmware & Configurations – Web
		Sessions on page 184.)
		To view, import, or reset the SSL Certificate, click the SSL
		Certificate link. (See Firmware & Configurations – Web
		Sessions on page 184.)
	Enable iGoogle	Select the check box to enable an SLB iGoogle gadget. The
	Gadget Web	iGoogle gadget allows an iGoogle user to view the port status of
	Content	many SLB devices on one web page. (See iGoogle Gadgets on
		page 186.)
SLB Firmware
	Update Firmware	To update the SLB firmware, select the checkbox. If you select
		this option, the SLB reboots after you apply the update.
		To view a log of all prior firmware updates, click the Firmware
		Update Log link.
		Note: For dual boot SLB branch office managers, the non-
		active boot bank is updated during the firmware update, without
		requiring a reboot. The configuration on the current boot bank
		may optionally be copied to the non-active boot bank during the
		firmware update.
	Load Firmware via	From the drop-down list, select the method of loading the
		firmware. Options are FTP, TFTP, HTTPS and SFTP (Secure
		FTP). FTP is the default.
		If you select HTTPS, the Upload File link becomes active.
		Select the link to open a popup window that allows you to
		browse to a firmware update file to upload.
	Firmware Filename	The name of the firmware update file downloaded from the
		Lantronix web site.
	Key	A key for validating the firmware file. The key is provided with
		the firmware file (32 hex characters).

SLB™ Branch Office Manager User Guide 181