4: Quick Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

Eth 1 Settings

Disabled: If selected, disables the network port. Default is

 

 

Eth1 enabled.

 

 

Obtain from DHCP: Acquires IP address, subnet mask,

 

 

hostname and gateway from the DHCP server. (The DHCP

 

 

server may not provide the hostname gateway, depending

 

 

on its setup.) This is the default setting. If you select this

 

 

option, skip to Gateway.

 

 

Obtain from BOOTP: Lets a network node request

 

 

configuration information from a BOOTP "server" node. If

 

 

you select this option, skip to Gateway.

 

 

Specify: Lets you manually assign a static IP address,

 

 

generally provided by the system administrator.

 

 

 

 

 

 

 

IP Address (if

Enter an IP address that will be unique and valid on your

 

specifying)

network. There is no default.

 

 

Enter all IP addresses in dot-quad notation. Do not use

 

 

leading zeros in the fields for dot-quad numbers less than

 

 

100. For example, if your IP address is 172.19.201.28, do

 

 

not enter 028 for the last segment.

 

 

Note: Currently, the SLB branch office manager does not

 

 

support configurations with the same IP subnet on multiple

 

 

interfaces (Ethernet or PPP).

 

 

 

 

 

 

Subnet Mask

If specifying an IP address, enter the network segment on

 

 

which the SLB device resides. There is no default.

 

 

 

 

 

 

Default Gateway

The IP address of the router for this network. There is no

 

 

default.

 

 

 

 

 

 

Hostname

The default host name is slbXXXX, where XXXX is the last

 

 

4 characters of the hardware address of Ethernet Port 1.

 

 

There is a 64-character limit (contiguous characters, no

 

 

spaces). The host name becomes the prompt in the

 

 

command line interface.

 

 

 

 

 

 

Domain

If desired, specify a domain name (for example,

 

 

support.lantronix.com). The domain name is used for host

 

 

name resolution within the SLB branch office manager. For

 

 

example, if abcd is specified for the SMTP server, and

 

 

mydomain.com is specified for the domain, if abcd cannot

 

 

be resolved, the SLB device attempts to resolve

 

 

abcd.mydomain.com for the SMTP server.

 

 

 

 

 

 

Date & Time Settings

 

 

 

 

 

 

 

 

 

Change Date/Time

Select the checkbox to manually enter the date and time

 

 

at the SLB branch office manager’s location.

 

 

 

 

 

Date

From the drop-down lists, select the current month, day,

 

 

and year.

 

 

 

 

 

Time

From the drop-down lists, select the current hour and

 

 

minute.

 

 

 

 

 

Time Zone

From the drop-down list, select the appropriate time zone.

 

 

 

 

 

 

SLB™ Branch Office Manager User Guide

35

Page 35
Image 35
Lantronix 900-510 manual Date & Time Settings