Lantronix 900-510 manual Boot Banks, Configuration Management

		12: Maintenance and Operation
Boot Banks
	Bank 1	Version of SLB firmware in bank 1.
		Note: The word "current" displays next to the bank the SLB
		branch office manager booted from.
	Bank 2	Version of SLB firmware in bank 2.
	Next Boot Bank	Current setting for bank to boot from at next reboot.
	Switch to Bank	If desired, select the alternate bank to boot from at next reboot.
	Copy configuration	If checked, will copy the configuration from the current bank to
	from Bank 1 to	the bank being updated. The two numbers are automatically
	Bank 2 during	generated so that the first number is the current bank.
	firmware update
	Copy contents of	If checked, enables you to copy the current boot bank to the
	Bank 1 to Bank 2	alternate boot bank. This process takes a few minutes to
		complete.
FTP/TFTP/SFTP
	Server	The IP address or host name of the server used for obtaining
		updates and saving or restoring configurations. May have up to
		64 alphanumeric characters; may include hyphens and
		underscores.
	Path	The default path on the server for obtaining firmware update
		files and getting and putting configuration save files.
	Login	The userid for accessing the FTP server. May be blank.
	Password /Retype	The FTP user password.
	Password
Configuration Management
	Configuration	From the option list, select one of the following:
	Management	No Save/Restore: Does not save or restore a configuration.
		Save Configuration: Saves all settings to file, which can be
		backed up to a location that is not on the SLB branch office
		manager.
		Restore Factory Defaults: Restores factory defaults. If you
		select this option, the SLB device reboots after you apply the
		update. Select the Save SSH Keys checkbox to save any
		imported or exported SSH keys. Select the Save SSL
		Certificate checkbox to save any imported certificate. Disabled
		by default.
		Restore Saved Configuration: Returns the SLB settings to a
		previously saved configuration. If you select this option, the SLB
		branch office manager reboots after you apply the update.
	Configuration Name	If you selected to save or restore a configuration, enter a name
	to Save to or	for the configuration file (up to 12 characters).
	Restore From

SLB™ Branch Office Manager User Guide 182