12: Maintenance and Operation

To generate and send Ethernet packets:

diag sendpacket host <IP Address or Name> port <TCP or UDP Port Number> [string <Packet String>] [protocol <tcpudp>] [count <Number of Packets>]

The default is 1.

To display all network traffic, applying optional filters:

Note: This command is not available

diag nettrace <one or more parameters>

Parameters:

ethport <12>

host <IP Address or Name> numpackets <Number of Packets> protocol <tcpudpicmp> verbose <enabledisable>

To display information on the internal memory, storage and processes of the SLB branch office manager:

diag internals

Note: This command is available in the CLI but not the web.

Status/Reports

On this page, you can view the status of the SLB ports and power supplies and generate a selection of reports.

Note: Status and statistics shown on the web interface represent a snapshot in time. To see the most recent data, you must reload the web page.

1.Click the Maintenance tab and select the Status/Reports option. The following page displays:

SLB™ Branch Office Manager User Guide

199

Page 199
Image 199
Lantronix 900-510 manual Status/Reports, To generate and send Ethernet packets