Lantronix 900-510 manual Date and Time Commands, To view the local date, time, and time zone

7: Services

Synchronize via

Select one of the following:

Broadcast from NTP Server: Enables the SLB branch office manager to accept time information periodically transmitted by the NTP server. This is the default if you enable NTP.

Poll NTP Server: Enables the SLB device to query the NTP Server for the correct time. If you select this option, complete one of the following:

Local: Select this option if the NTP servers are on a local network, and enter the IP address of up to three NTP servers. This is the default, and it is highly recommended.

Public: Select this option if you want to use a public NTP server, and select the address of the NTP server from the drop-down list. This is not recommended because of the high load on many public NTP servers. All servers in the drop-down list are stratum-2 servers. (See www.ntp.org for more information.)

Each public NTP server has its own usage rules - -please refer to the appropriate web site before using one. Our listing them here is to provide easy configuration but does not indicate any permission for use.

2. To save, click the Apply button.

Date and Time Commands

The following CLI commands correspond to the web page entries described above.

To set the local date, time, and local time zone (one parameter at a time):

set datetime <one date/time parameter>

Parameters:

date <MMDDYYhhmm[ss]> timezone <Time Zone>

Note: If you type an invalid time zone, the system guides you through the process of selecting a time zone.

To view the local date, time, and time zone:

show datetime

SLB™ Branch Office Manager User Guide 78