Lantronix 900-510 manual Local/Remote User Settings, Local User Passwords, To add a user

		11: User Authentication
Local User Passwords
	Complex	Select to enable the SLB branch office manager to enforce
	Passwords	rules concerning the password structure (e.g., alphanumeric
		requirements, number of characters, punctuation marks).
		Disabled by default.
		Complexity rules:
		Passwords must be at least eight characters long.
		They must contain one upper case letter (A-Z), one lower case
		letter (a-z), one digit ( 0-9), and one punctuation character
		(()`~!@#$%%^&*-+=\{}[]:;"'<>,.?/_).
	Allow Reuse	Select to enable users to continue to reuse old passwords. If
		you disable the check box, they cannot use any of the Reuse
		History number of passwords. Enabled by default.
	Reuse History	The number of passwords the user must use before reusing an
		old password. The default is 4.
		For example, if you set reuse history to 4, the user may reuse
		an old password after using 4 other passwords.
	Password	The number of days until the password expires. The default
	Lifetime (days)	setting is 90.
	Warning Period	The number of days ahead that the system warns that the
	(days)	user's password will expire. The default setting is 7.
	Max Login	The number of times (up to 8) the user can attempt to log in
	Attempts	unsuccessfully before the system locks the user out. The
		default setting is 0 (disabled).
	Lockout Period	The number of minutes (up to 90) the locked-out user must
	(minutes)	wait before trying to log in to the web interface again. The
		default setting is 0 (disabled).

3. Click the Apply button.

To add, edit, or delete a user:

You can delete a user listed in the table on this page or open the page for adding or editing a user.

You have the following options:

To add a user, click the Add/Edit User button. The Local/Remote User Settings page displays. (See Local/Remote User Settings below)

To edit a user, select the user in the table and click the Add/Edit User button. The Local/Remote User Settings page displays.

To delete a user, select the user in the table, click the Delete button, and then click the Apply button.

Local/Remote User Settings

On this page, you can add, edit, or delete a local or remote user.

To add a user:

1.On the Local/Remote Users page (described above), click the Add/Edit User button. The Local/Remote User Settings page displays.

SLB™ Branch Office Manager User Guide 138