Lantronix 900-510 manual Dial-in Text Mode to a Remote Device, Connect to the device port

13: Application Examples

3. Connect to the device port:

[SLB]> connect direct deviceport 2

4. View messages from the SUN server console:

Mar 15 09:09:44 tssf280r sendmail[292]: [ID 702911 mail.info] starting daemon

(8.12.2+Sun): SMTP+queueing@00:15:00

Mar 15 09:09:44 tssf280r sendmail[293]: [ID 702911 mail.info] starting daemon

(8.12.2+Sun): queueing@00:15:00

Mar 15 14:44:40 tssf280r sendmail[275]: [ID 702911 mail.info] starting daemon

(8.12.2+Sun): SMTP+queueing@00:15:00

Mar 15 14:44:40 tssf280r sendmail[276]: [ID 702911 mail.info] starting daemon

(8.12.2+Sun): queueing@00:15:00

5. Reboot the SUN server:

reboot

<shutdown messages from SUN>

6.Use the escape sequence to escape from direct mode back to the command line interface.

Dial-in (Text Mode) to a Remote Device

Sun UNIX Server

Remote User

Phone	Phone Line	Modem	Serial Cable to Port 2
		t
System		Serial Cable	SLB Branch Office Manager
		to Port 1

This example shows a modem connected to an SLB device port, and a Sun server connected to another SLB device port. You can configure the modem for text mode dial- in, so a remote user can dial into the modem using a terminal emulation program and access the Sun server. (HyperTerminal™, which comes with the Microsoft ® Windows™ operating system, is an example of a terminal emulation program.)

In this example, the sysadmin would:

1. Configure the device port that the modem is connected to for dial-in:

[SLB]> set deviceport port 1 modemmode text Device Port settings successfully updated.

[SLB]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A" Device Port settings successfully updated.

[SLB]> set deviceport port 1 auth pap Device Port settings successfully updated.

[SLB]> set deviceport port 1 localsecret "password" Device Port settings successfully updated.

[SLB]> set deviceport port 1 modemstate dialin Device Port settings successfully updated.

SLB™ Branch Office Manager User Guide 208