Lantronix 900-510 manual Enabling IP Filters, Configuring IP Filters, To enable IP filters

6: Basic Parameters

Enabling IP Filters

On the IP Filter page, you can enable all filters or disable all filters.

Note: There is no way to enable or disable individual filters.

To enable IP filters:

1. Enter the following:

Enable IP Filter	Select the Enable IP Filter checkbox to enable all filters,
	or clear the checkbox to disable all filters. Disabled by
	default.
Packets Dropped	Displays the number of data packets that the filter ignored
(view only)	(did not respond to).
Packets Rejected	Displays the number of data packets that the filter sent a
(view only)	“rejected” response to.
Test Timer	Timer for testing IP Filter rulesets. Select No to disable the
	timer. Select Yes, minutes (1-120)to enable the timer and
	enter the number of minutes the timer should run. The
	timer automatically disables the IP Filters when the time
	expires.
Time Remaining	Indicates how many minutes are left on the timer before it
(view only)	expires and IP Filters are disabled.

Configuring IP Filters

The administrator can add, edit, delete, and map IP filters.

Note: A configured filter has no effect until it is mapped to a network interface. See Mapping a Rule Set on page 56.

SLB™ Branch Office Manager User Guide 54