9: PC Cards

 

 

 

 

 

 

 

 

 

DOD

Enables PAP or CHAP authentication for dial-in & dial-on-

 

Authentication

demand. PAP is the default. With PAP, users are

 

 

authenticated by means of the Local Users and any of the

 

 

remote authentication methods that are enabled. With

 

 

CHAP, the DOD CHAP Handshake fields authenticate the

 

 

user.

 

 

 

 

 

DOD CHAP

For DOD Authentication, enter the host/username for

 

Handshake

UNIX systems) or secret/user password (for Windows

 

 

systems) used for CHAP authentication. May have up to

 

 

128 characters.

 

 

 

 

 

Enable NAT

Select to enable Network Address Translation (NAT) for

 

 

dial-in and dial-out PPP connections on a per modem

 

 

(Device Port or PC Card) basis. Users dialing into the SLB

 

 

branch office manager access the network connected to

 

 

Eth1 and/or Eth2.

 

 

Note: IP forwarding must be enabled on the Network -

 

 

Settings page for NAT to work. To enable, click the IP

 

 

Forwarding link to display the Network Settings page. See

 

 

 

 

 

Dial-out

Phone number for dialing out to a remote system or serial

 

Number

device. May have up to 20 characters. Any format is

 

 

acceptable.

 

 

 

 

 

Dial-out

User ID for dialing out to a remote system. May have up to

 

Login

32 characters.

 

 

 

 

 

Dial-out Password

Password for dialing out to a remote system. May have up

 

and Retype

to 64 characters.

 

 

 

 

 

Restart Delay

The number of seconds after the timeout and before the

 

 

SLB branch office manager attempts another connection.

 

 

The default is 30 seconds.

 

 

 

 

IP Settings

 

 

 

Service

The available connection services for this modem port

 

 

 

(Telnet, SSH, or TCP). Only one can be active at a time.

 

 

The default is None.

 

 

 

 

 

Telnet Port

Telnet session port number to use if you selected Telnet.

 

 

Defaults:

 

 

Upper PC Card Slot: 2049

 

 

Lower PC Card Slot: 2050

 

 

Range: 1025-65535

 

 

 

 

 

SSH Port

The SSH session port number to use if you selected SSH.

 

 

Defaults:

 

 

Upper PC Card Slot: 3049

 

 

Lower PC Card Slot: 3050

 

 

Range: 1025-65535

 

 

 

 

SLB™ Branch Office Manager User Guide

121

Page 121
Image 121
Lantronix 900-510 manual IP Settings, Service, Telnet Port, Range