Lantronix 900-510 manual Navigating, Entering the Settings, To enter setup information

4: Quick Setup

up/down arrow

Note: Have your information handy as the display times out without accepting any unsaved changes if you take more than 30 seconds between entries.

Any changes made to the network, console port, and date/time settings take effect immediately.

Navigating

The front panel has one Enter button (in the center) and four arrow buttons (up, left, right, and down). Press the arrow buttons to navigate from one option to another, or to increment or decrement a numerical entry of the selected option. Use the Enter button to select an option to change or to save your settings.

Action	Button
To move to the next option (e.g., from Network Settings to	right arrow
Console Settings)
To return to the previous option	left arrow
To enter edit mode	Enter (center button)
Within edit mode, to increase or decrease a numerical	up and down arrows
entry
Within edit mode, to move the cursor right or left	right or left arrows
To exit edit mode	Enter
To scroll up or down the list of parameters within an option	up and down arrows
(e.g., from IP Address to Mask)

Table 4-2. Front Panel Setup Options with Associated Parameters right/left arrow

Normal	Network	Console	Date /	Release
	Settings	Settings	Time
			Settings
	Eth1 IP Address	Baud Rate	Time Zone	Firmware version and
		Data Bits		date code (display only)
	Eth1 Subnet Mask		Date/Time
		Stop Bits
	Gateway
		Parity		Restore Factory
	DNS1	Flow Control		Defaults
	DNS2
	DNS3

Entering the Settings

To enter setup information:

1.From the normal display (host name, date and time), press the right arrow button to display Network Settings. The IP address for Eth1 displays.

SLB™ Branch Office Manager User Guide 31